There are two wires of the same material and same length. The diameter of the second wire is two times the diameter of the first wire. What is the ratio of the extensions produced in the wires by applying the same load?

Column $-II$ is related to Column $-I$. Join them appropriately:

Column $-I$	Column $-II$
$(a)$ When temperature is raised,Young's modulus of a body	$(i)$ Zero
$(b)$ Young's modulus for air	$(ii)$ Infinite
	$(iii)$ Decreases
	$(iv)$ Increases

Which of the following curves represents the correct distribution of elongation $(y)$ along a heavy rod under its own weight? ($L$ = length of rod, $x$ = distance of a point from the lower end).

One end of a metal wire is fixed to a ceiling and a load of $2 \ kg$ hangs from the other end. $A$ similar wire is attached to the bottom of the load and another load of $1 \ kg$ hangs from this lower wire. Then the ratio of longitudinal strain of the upper wire to that of the lower wire will be . . . . . . .
[Area of cross section of wire $= 0.005 \ cm^2$,$Y = 2 \times 10^{11} \ Nm^{-2}$ and $g = 10 \ ms^{-2}$]

$(a)$ $A$ steel wire of mass $\mu$ per unit length with a circular cross-section has a radius of $0.1\,cm$. The wire is of length $10\,m$ when measured lying horizontal and hangs from a hook on the wall. $A$ mass of $25\,kg$ is hung from the free end of the wire. Assuming the wire to be uniform and lateral strains $\ll$ longitudinal strains,find the extension in the length of the wire. The density of steel is $7860\,kg/m^3$ and Young's modulus $Y = 2 \times 10^{11}\,N/m^2$.
$(b)$ If the yield strength of steel is $2.5 \times 10^8\,N/m^2$,what is the maximum weight that can be hung at the lower end of the wire?

There are two wires of the same material and same length. If the diameter of the second wire is two times the diameter of the first wire,then the ratio of the extension produced in the wires by applying the same load will be: