Three discs $A, B$ and $C$ having radii $2\; m, 4\; m,$ and $6\; m$ respectively are coated with carbon black on their outer surfaces. The wavelengths corresponding to maximum intensity are $300\; nm, 400\; nm$ and $500\; nm$ respectively. The power radiated by them are $Q_A, Q_B$ and $Q_C$ respectively. Which of the following is true?

$A$ wall with a cavity consists of two layers of brick separated by a layer of air. All three layers have the same thickness,and the thermal conductivity of the brick is much greater than that of air. The left layer is at a higher temperature than the right layer,and a steady-state condition exists. Which of the following graphs correctly predicts the variation of temperature $T$ with distance $d$ inside the cavity?

Three rods of Copper,Brass,and Steel are welded together to form a $Y$ shaped structure. The area of cross-section of each rod is $4 \ cm^2$. The end of the copper rod is maintained at $100^\circ C$,whereas the ends of the brass and steel rods are kept at $0^\circ C$. The lengths of the copper,brass,and steel rods are $46 \ cm$,$13 \ cm$,and $12 \ cm$ respectively. The rods are thermally insulated from the surroundings except at the ends. The thermal conductivities of copper,brass,and steel are $0.92$,$0.26$,and $0.12 \ CGS$ units respectively. The rate of heat flow through the copper rod is ....... $cal \ s^{-1}$.

Power radiated by a black body at temperature $T_1$ is $P$ and it radiates maximum energy at a wavelength $\lambda_1$. If the temperature of the black body is changed from $T_1$ to $T_2$, it radiates maximum energy at a wavelength $\frac{\lambda_1}{2}$. The power radiated at $T_2$ is (in $P$)

Determine whether the following statements are True or False:
$(a)$ "Conduction stops once a rod achieves thermal steady state."
$(b)$ $A$ surface that is a good emitter is also a good absorber.
$(c)$ $A$ perfect black body must be black in color.
$(d)$ The value of heat capacity is the same under different conditions for a given matter.

In the variable state,the rate of flow of heat is controlled by