Three rods $A, B$ and $C$ of thermal conductivities $K, 2K$ and $4K$,cross-sectional areas $A, 2A$ and $2A$ and lengths $2l, l$ and $l$ respectively are connected as shown in the figure. If the ends of the rods are maintained at temperatures $100^{\circ}C, 50^{\circ}C$,and $0^{\circ}C$ respectively,then the temperature $\theta$ of the junction is ......... $^{\circ}C$

Consider two insulating sheets with thermal resistances $R_1$ and $R_2$ as shown in the figure. The temperature $\theta$ at the junction is:

Two rods $A$ and $B$ of different materials but same cross-section are joined as shown in the figure. The free end of $A$ is maintained at $100^{\circ}C$ and the free end of $B$ is maintained at $0^{\circ}C$. If $l_2 = 2l_1$,$K_1 = 2K_2$ and the rods are thermally insulated from the sides to prevent heat losses,then the temperature $\theta$ of the junction of the two rods is ........ $^{\circ}C$.

Three conductors of the same length having thermal conductivities $k_1, k_2$ and $k_3$ are connected as shown in the figure. The areas of cross-section of the $1^{\text{st}}$ and $2^{\text{nd}}$ conductors are the same,and for the $3^{\text{rd}}$ conductor,it is double that of the $1^{\text{st}}$ conductor. The temperatures are given in the figure. In the steady-state condition,the value of $\theta$ is . . . . . . $^{\circ}C$. (Given: $k_1 = 60 \ J s^{-1} m^{-1} K^{-1}, k_2 = 120 \ J s^{-1} m^{-1} K^{-1}, k_3 = 135 \ J s^{-1} m^{-1} K^{-1}$)

$ABCDE$ is a regular pentagon made of uniform wire. Heat enters at $A$ and leaves at $C$. $T_B$ and $T_D$ are the temperatures of points $B$ and $D$ respectively. Find the temperature $T_C$.

$A$ copper rod $2 \ m$ long has a circular cross-section of radius $1 \ cm$. One end is kept at $100^{\circ}C$ and the other at $0^{\circ}C$,and the surface is covered by non-conducting material to prevent heat losses through the surface. The thermal resistance of the bar in Kelvin per Watt is (Take thermal conductivity $K = 401 \ W/m-K$ of copper):- (in $.9$)