To determine the internal resistance of a cell by using a potentiometer, the null point is at $1 \, m$ when the cell is shunted by $3 \, \Omega$ resistance and at a length $1.5 \, m$ when the cell is shunted by $6 \, \Omega$ resistance. The internal resistance of the cell is:

$A$ potentiometer wire of length $10 \,m$ and resistance $20 \,\Omega$ is connected in series with a $25 \,V$ battery and an external resistance $30 \,\Omega$. $A$ cell of emf $E$ in the secondary circuit is balanced by a $250 \,cm$ long potentiometer wire. The value of $E$ (in volt) is $\frac{x}{10}$. The value of $x$ is.......

$A$ potentiometer wire of length $300\,cm$ is connected in series with a resistance $780\,\Omega$ and a standard cell of emf $4\,V$. $A$ constant current flows through the potentiometer wire. The length of the null point for a cell of emf $20\,mV$ is found to be $60\,cm$. The resistance of the potentiometer wire is ... $\Omega$.

$A$ potentiometer consists of a wire of length $4\, m$ and resistance $10\,\Omega$. It is connected to a cell of $e.m.f.$ $2\, V$. The potential difference per unit length of the wire will be ............. $V/m$.

In a potentiometer (see figure) a balance is obtained at a length of $400 \ mm$ when using a known battery of emf $1.6 \ V$. After removing this battery,another battery of unknown emf is used and balance is obtained at a length of $650 \ mm.$ The emf of the unknown battery is ............. $V$. (in $V$)

Two cells of e.m.f. $E_1$ and $E_2$ $(E_1 > E_2)$ are connected as shown in the figure. When a potentiometer is connected between points $A$ and $B$, the balancing length of the potentiometer wire is $412 \text{ cm}$. When the same potentiometer is connected between points $A$ and $C$, the balancing length is $103 \text{ cm}$. The ratio $E_1 : E_2$ is: