Class 11PhysicsSystem of Particles and Rotational MotionMix Example - System of Particles and Rotational Motion
MediumTwo flywheels are connected by a non-slipping belt as shown in the figure. $I_1 = 4 \ kg \ m^2$,$r_1 = 20 \ cm$,$I_2 = 20 \ kg \ m^2$,and $r_2 = 30 \ cm$. $A$ torque of $10 \ Nm$ is applied on the smaller wheel. Match the entries of column $I$ with appropriate entries of column $II$.
Quantities Their numerical values (in $SI$ units) a. Angular acceleration of smaller wheel $1$. $5/3$ b. Torque on the larger wheel $2$. $100/3$ c. Angular acceleration of larger wheel $3$. $5/2$
| Quantities | Their numerical values (in $SI$ units) |
| a. Angular acceleration of smaller wheel | $1$. $5/3$ |
| b. Torque on the larger wheel | $2$. $100/3$ |
| c. Angular acceleration of larger wheel | $3$. $5/2$ |
- A$a-iii, b-ii, c-i$
- B$a-iii, b-i, c-ii$
- C$a-ii, b-i, c-iii$
- D$a-ii, b-iii, c-i$
Explore More
Similar Questions
$A$ thin circular coin of mass $5 \text{ g}$ and radius $4/3 \text{ cm}$ is initially in a horizontal $xy$-plane. The coin is tossed vertically up ($+z$ direction) by applying an impulse of $J = \sqrt{\frac{\pi}{2}} \times 10^{-2} \text{ N-s}$ at a distance $r = 2/3 \text{ cm}$ from its center. The coin spins about its diameter and moves along the $+z$ direction. By the time the coin reaches back to its initial position,it completes $n$ rotations. The value of $n$ is. . . . . [Given: The acceleration due to gravity $g = 10 \text{ m/s}^2$]
DifficultIIT 2023
View Solution$A$ wheel of radius $0.5 \ m$ and a moment of inertia of $10 \ kg \cdot m^2$ is rotating freely at an angular speed of $70 \ rev/min$. The wheel can be stopped in $5.0 \ s$ by pressing a wet cloth against the rim and exerting a radially inward force of $88 \ N$. The coefficient of kinetic friction between the wheel and wet cloth is:
DifficultTS EAMCET 2022
View Solution$Assertion :$ $A$ hollow shaft is found to be stronger than a solid shaft made of the same material and having the same mass per unit length.
$Reason :$ The torque required to produce a given twist in a hollow cylinder is greater than that required to twist a solid cylinder of the same length and material.
$Reason :$ The torque required to produce a given twist in a hollow cylinder is greater than that required to twist a solid cylinder of the same length and material.
MediumAIIMS 2016
View SolutionIn the given figure,a ring of mass $m$ is kept on a horizontal surface,and a body of equal mass $m$ is attached through a string wound on the ring. When the system is released,the ring rolls without slipping. Consider the following statements and choose the correct option.
$(i)$ Acceleration of the centre of mass of the ring is $\frac{g}{3}$.
$(ii)$ Acceleration of the hanging particle is $\frac{2g}{3}$.
$(iii)$ Frictional force (on the ring) acts in the forward direction.
$(iv)$ Frictional force (on the ring) acts in the backward direction.
$(i)$ Acceleration of the centre of mass of the ring is $\frac{g}{3}$.
$(ii)$ Acceleration of the hanging particle is $\frac{2g}{3}$.
$(iii)$ Frictional force (on the ring) acts in the forward direction.
$(iv)$ Frictional force (on the ring) acts in the backward direction.
Difficult
View Solution$A$ uniform rod of length $l$ and density $\rho$ is revolving about a vertical axis passing through its one end. If $\omega$ is the angular velocity of the rod,then the centrifugal force per unit area of the rod is
Vedclass Products
For Students
Vedclass Test Series
Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.
Start Free TrialFor Teachers
Exam Paper Generator
Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.
Try FreeFor Institutes
Online Exam Module
Live online exams with unlimited students, 360° analytics & white-label branding.
See Demo