Two metallic rings $A$ and $B$,identical in shape and size but having different resistivities $\rho_A$ and $\rho_B$,are kept on top of two identical solenoids as shown in the figure. When current $I$ is switched on in both the solenoids in an identical manner,the rings $A$ and $B$ jump to heights $h_A$ and $h_B$,respectively,with $h_A > h_B$. The possible relation$(s)$ between their resistivities and their masses $m_A$ and $m_B$ is(are):
$(A)$ $\rho_A > \rho_B$ and $m_A = m_B$
$(B)$ $\rho_A < \rho_B$ and $m_A = m_B$
$(C)$ $\rho_A > \rho_B$ and $m_A > m_B$
$(D)$ $\rho_A < \rho_B$ and $m_A < m_B$

  • A
    $(B, C)$
  • B
    $(B, D)$
  • C
    $(A, D)$
  • D
    $(C, D)$

Explore More

Similar Questions

$A$ short-circuited coil is placed in a time-varying magnetic field. Electrical power is dissipated due to the current induced in the coil. If the number of turns were to be quadrupled and the wire radius halved,the electrical power dissipated would be

$A$ part of a complete circuit is shown in the figure. At some instant,the value of current $I$ is $1\, A$ and it is decreasing at a rate of $10^{2}\, A s^{-1}$. The value of the potential difference $V_{P} - V_{Q}$ (in volts) at that instant is:

$STATEMENT-1$ $A$ vertical iron rod has a coil of wire wound over it at the bottom end. An alternating current flows in the coil. The rod goes through a conducting ring as shown in the figure. The ring can float at a certain height above the coil. Because
$STATEMENT-2$ In the above situation,a current is induced in the ring which interacts with the radial component of the magnetic field to produce an average force in the upward direction.

$A$ metallic square wire loop of side $10\, cm$ and resistance $1\,\Omega$ is moved with a constant velocity $v_0$ in a uniform magnetic field of induction $B = 2\, T$ as shown in the figure. The magnetic field is perpendicular into the plane of the loop. The loop is connected to a network of resistors each of value $3\,\Omega$. The resistance of the lead wires $OS$ and $PQ$ are negligible. What should be the speed of the loop so as to have a steady current of $1\, mA$ in it? Give the direction of current in the loop.

Difficult
View Solution

Two identical coaxial circular loops carry a current $i$ each,circulating in the same direction. If the loops approach each other,then:

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo