Two slabs $A$ and $B$ of equal surface area are placed one over the other such that their surfaces are completely in contact. The thickness of slab $A$ is twice that of $B$. The coefficient of thermal conductivity of slab $A$ is twice that of $B$. The first surface of slab $A$ is maintained at $100^{\circ} C$, while the second surface of slab $B$ is maintained at $25^{\circ} C$. The temperature at the contact of their surfaces is (in $^{\circ} C$)

Six identical conducting rods are joined as shown in the figure. Points $A$ and $D$ are maintained at $100^{\circ} C$ and $10^{\circ} C$ respectively. The temperature of junction $C$ will be $.... ^{\circ} C$.

$A$ copper rod of length $18 \ cm$ and a steel rod of length $6 \ cm$ are joined together to form a composite rod of uniform cross-section. The temperature of the free end of the copper rod is $100 \ ^\circ C$ and the temperature of the free end of the steel rod is $0 \ ^\circ C$. What is the temperature at the junction in $^\circ C$? (Thermal conductivity of copper is $9$ times that of steel. The rod is in a steady state.)

Two identical square rods of metal are welded end to end as shown in figure $(a)$. Assume that $10 \, cal$ of heat flows through the rods in $2 \, min$. Now the rods are welded as shown in figure $(b)$. The time it would take for $10 \, cal$ to flow through the rods now,is ........ $\min$.

$A$ composite metal bar of uniform cross-section is made up of a length of $25 \ cm$ of copper,$10 \ cm$ of nickel,and $15 \ cm$ of aluminium. Each part is in perfect thermal contact with the adjoining part. The copper end of the composite rod is maintained at $100^{\circ}C$ and the aluminium end at $0^{\circ}C$. The whole rod is covered with an insulating belt so that no heat loss occurs at the sides. If $K_{\text{Cu}} = 2K_{\text{Al}}$ and $K_{\text{Al}} = 3K_{\text{Ni}}$,what will be the temperatures of the $\text{Cu-Ni}$ and $\text{Ni-Al}$ junctions,respectively?

The ratio of thermal conductivity of two rods of different materials is $5 : 4$. If the two rods have the same area of cross-section and the same thermal resistance,what is the ratio of their lengths?