Two water pipes P and Q having diameters 2 ti | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) Given: Diameter of pipe $P$,$d_{p} = 2 	imes 10^{-2} \ m$,so radius $r_{p} = 10^{-2} \ m$.Diameter of pipe $Q$,$d_{q} = 4 	imes 10^{-2} \ m$,so

Vedclass · Accepted Answer

$4$ times that of $Q$

Vedclass · Answer

(A) Given: Diameter of pipe $P$,$d_{p} = 2 	imes 10^{-2} \ m$,so radius $r_{p} = 10^{-2} \ m$.Diameter of pipe $Q$,$d_{q} = 4 	imes 10^{-2} \ m$,so radius $r_{q} = 2 	imes 10^{-2} \ m$.According to the equation of continuity,the product of cross-sectional area and velocity is constant for an incompressible fluid: $A_{p}v_{p} = A_{q}v_{q}$.Therefore,the velocity is inversely proportional to the cross-sectional area: $\frac{v_{p}}{v_{q}} = \frac{A_{q}}{A_{p}}$.Since $A = \pi r^{2}$,we have $\frac{v_{p}}{v_{q}} = \frac{\pi r_{q}^{2}}{\pi r_{p}^{2}} = \left(\frac{r_{q}}{r_{p}}ight)^{2}$.Substituting the values: $\frac{v_{p}}{v_{q}} = \left(\frac{2 	imes 10^{-2}}{10^{-2}}ight)^{2} = (2)^{2} = 4$.Thus,$v_{p} = 4v_{q}$. The velocity of water in pipe $P$ is $4$ times that of $Q$.

Two water pipes $P$ and $Q$ having diameters $2 \times 10^{-2} \ m$ and $4 \times 10^{-2} \ m$,respectively,are joined in series with the main supply line of water. The velocity of water flowing in pipe $P$ is

Similar Questions

Two water pipes $P$ and $Q$ having diameters $2 \times 10^{-2} \, m$ and $4 \times 10^{-2} \, m$ respectively are joined in series with the main supply line of water. The velocity of water flowing in pipe $P$ is ........

$A$ liquid flows in a tube from left to right as shown in the figure. $A_1$ and $A_2$ are the cross-sections of the portions of the tube as shown. Then the ratio of speeds $v_1/v_2$ will be

Water falls from a tap,down the streamline.

The cylindrical tube of a spray pump has a cross-section of $8 \,cm^{2}$, one end of which has $40$ fine holes each of area $10^{-8} \,m^{2}$. If the liquid flows inside the tube with a speed of $0.15 \,m \,min^{-1}$, the speed with which the liquid is ejected through the holes is (in $\,ms^{-1}$)

An ideal fluid flows through a pipe of circular cross-section with diameters $5 \ cm$ and $10 \ cm$ as shown. The ratio of velocities of the fluid at $A$ and $B$ is

Vedclass Test Series

Exam Paper Generator

Online Exam Module