Two wires each of radius $0.2\,cm$ and negligible mass, one made of steel and the other made of brass, are loaded as shown in the figure. The elongation of the steel wire is $.........\times 10^{-6}\,m$. [Young's modulus for steel $= 2 \times 10^{11}\,N/m^2$ and $g = 10\,m/s^2$]

$A$ student performs an experiment to determine the Young's modulus of a wire, exactly $2 \,m$ long, by Searle's method. In a particular reading, the student measures the extension in the length of the wire to be $0.8 \,mm$ with an uncertainty of $\pm 0.05 \,mm$ at a load of exactly $1.0 \,kg$. The student also measures the diameter of the wire to be $0.4 \,mm$ with an uncertainty of $\pm 0.01 \,mm$. Take $g=9.8 \,m/s^2$ (exact). The Young's modulus obtained from the reading is

$A$ rod is fixed between two points at $20\,^oC$. The coefficient of linear expansion of the material of the rod is $1.1 \times 10^{-5}/\,^oC$ and Young's modulus is $1.2 \times 10^{11}\,N/m^2$. Find the stress developed in the rod if the temperature of the rod becomes $10\,^oC$.

When a rod is heated but prevented from expanding,the stress developed is independent of

$A$ stress of $1.5 \, kg.wt/mm^2$ is applied to a wire of Young's modulus $5 \times 10^{11} \, N/m^2$. The percentage increase in its length is

If the length of a wire is made double and the radius is halved of its respective values,then the Young's modulus of the material of the wire will: