Define potential gradient and write its $SI$ unit.

$A$ potentiometer wire $PQ$ of $1\,m$ length is connected to a standard cell $E_{1}$. Another cell $E_{2}$ of emf $1.02\,V$ is connected with a resistance $r$ and switch $S$ (as shown in figure). With switch $S$ open,the null position is obtained at a distance of $49\,cm$ from $Q$. The potential gradient in the potentiometer wire is.......$V/cm$.

$A$ cell in a secondary circuit gives a null deflection for $2.5 \ m$ length of a potentiometer wire having a total length of $10 \ m$. If the length of the potentiometer wire is increased by $1 \ m$ without changing the cell in the primary circuit,the new position of the null point is: (in $m$)

$A$ potentiometer has a uniform wire of length $5 \,m$. $A$ battery of emf $10 \,V$ and negligible internal resistance is connected between its ends. $A$ secondary cell connected to the circuit gives a balancing length at $200 \,cm$. The emf of the secondary cell is: (in $\,V$)

$A$ potentiometer wire has length $4\, m$ and resistance $8\, \Omega$. The resistance that must be connected in series with the wire and an accumulator of e.m.f. $2\, V$,so as to get a potential gradient of $1\, mV$ per $cm$ on the wire is ............. $\Omega$.

In the given figure,there is a circuit of a potentiometer of length $AB = 10 \, m$. The resistance per unit length is $0.1 \, \Omega/cm$. $A$ battery of $6 \, V$ and an internal resistance of $20 \, \Omega$ is connected across $AB$. The maximum value of emf that can be measured by this potentiometer is (in $V$):