$A$ thick brass wire of length $L$ and density $\rho$ is suspended from a rigid support. Due to its own weight,$\ell$ is the increase in length. The Young's modulus $Y$ of the brass wire in terms of density is $(g = \text{acceleration due to gravity})$

If the ratio of diameters,lengths and Young's moduli of steel and brass wires shown in the figure are $p, q$ and $r$ respectively,then the corresponding ratio of increase in their lengths would be

The cross-sectional area of each wire is $10^{-4} \, m^2$. What is the displacement of point $B$?

There is some change in length when a $33000 \,N$ tensile force is applied on a steel rod of area of cross-section $10^{-3} \,m^2$. The change of temperature required to produce the same elongation, if the steel rod is heated, is (The modulus of elasticity is $3 \times 10^{11} \,N/m^2$ and the coefficient of linear expansion of steel is $1.1 \times 10^{-5} /{ }^{\circ}C$). (in $^{\circ}C$)

Two wires made of the same material are clamped rigidly at one end and pulled by the same force on the other end. The length and the radius of the first wire are three times those of the second wire. If $x$ is the increase in the length of the first wire,then the increase in the length of the second wire is

In Young's experiment,if the length of the wire and the radius are both doubled,then the value of $Y$ will become: