A solid cylinder of radius R made of a materi | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The system consists of two parallel paths for heat flow: the inner solid cylinder and the outer cylindrical shell.Since the system is in a steady

Vedclass · Accepted Answer

$\frac{K_{1}+3 K_{2}}{4}$

Vedclass · Answer

(D) The system consists of two parallel paths for heat flow: the inner solid cylinder and the outer cylindrical shell.Since the system is in a steady state and there is no heat loss across the cylindrical surface,the total heat flow $Q_{	ext{total}}$ is the sum of heat flows through the two parts: $Q_{	ext{total}} = Q_{1} + Q_{2}$.The rate of heat flow is given by $Q = \frac{KA \Delta 	heta}{L}$.For the inner cylinder,area $A_{1} = \pi R^{2}$.For the outer shell,area $A_{2} = \pi (2R)^{2} - \pi R^{2} = 3\pi R^{2}$.The total area is $A = A_{1} + A_{2} = 4\pi R^{2}$.Equating the heat flow: $\frac{K(4\pi R^{2}) \Delta 	heta}{L} = \frac{K_{1}(\pi R^{2}) \Delta 	heta}{L} + \frac{K_{2}(3\pi R^{2}) \Delta 	heta}{L}$.Canceling common terms $\frac{\pi R^{2} \Delta 	heta}{L}$ from both sides:$4K = K_{1} + 3K_{2}$.Therefore,the effective thermal conductivity is $K = \frac{K_{1} + 3K_{2}}{4}$.

Similar Questions

Two walls of thickness $d_1$ and $d_2$ and thermal conductivities $k_1$ and $k_2$ are in contact. In the steady state,the temperatures of the outer surfaces are $T_1$ and $T_2$. Find the temperature of the common interface.

The ratio of the thermal conductivity of two rods of different materials is $6:5$. The two rods of same area of cross section and same thermal resistance will have the lengths in the ratio:

The two ends of a rod of length $L$ and a uniform cross-sectional area $A$ are kept at two temperatures $T_{1}$ and $T_{2}$ $(T_{1} > T_{2})$. The rate of heat transfer,$\frac{dQ}{dt}$ through the rod in a steady state is given by:

The two ends of a metal rod are maintained at temperatures $100 ^\circ C$ and $110 ^\circ C$. The rate of heat flow in the rod is found to be $4.0 \ J/s$. If the ends are maintained at temperatures $200 ^\circ C$ and $210 ^\circ C$,the rate of heat flow will be.... $J/s$

The rate of heat conduction through a cylindrical rod is $Q_1$. The temperatures at the ends of the rod are $T_1$ and $T_2$. If all the dimensions of the rod are doubled while keeping the temperatures the same,the new rate of heat conduction is $Q_2$. Then:

Vedclass Test Series

Exam Paper Generator

Online Exam Module