$A$ long straight solenoid with a cross-sectional radius $a$ and number of turns per unit length $n$ has a current varying with time as $I = I_0 \sin(\omega t)$ (or simply $dI/dt = I$). The magnitude of the electric field as a function of distance $r$ from the solenoid axis is,

$A$ uniform magnetic field $B$ exists in a cylindrical region of radius $R = 10 \, cm$ as shown in the figure. $A$ uniform wire of length $L = 80 \, cm$ and resistance $R_{wire} = 4.0 \, \Omega$ is bent into a square frame of side length $a = 20 \, cm$ and is placed with one side along a diameter of the cylindrical region. If the magnetic field increases at a constant rate of $\frac{dB}{dt} = 0.010 \, T/s$,find the current induced in the frame.

$A$ conducting ring of radius $1\,m$ is placed in a uniform magnetic field $B$ of $0.01\,T$ oscillating with a frequency of $100\,Hz$,with its plane at right angles to $B$. What will be the induced electric field in $V/m$?

One turn of insulated wire in the form of a planar square frame with side $l = 0.2\,m$ and resistance $1\,\Omega$ is placed in a uniform magnetic field perpendicular to the plane of the frame. The current passing through the turn when the magnetic field starts to decrease at a constant rate of $0.1\,T/s$ is....$mA$

$A$ conducting ring of radius $r$ is placed in a varying magnetic field perpendicular to the plane of the ring. If the rate at which the magnetic field varies is $x$,the electric field intensity at any point on the ring is:

$A$ non-conducting ring of radius $R$ and mass $m$ having charge $q$ uniformly distributed over its circumference is placed on a rough horizontal surface. $A$ vertical time-varying uniform magnetic field $B = 4t^2$ is switched on at time $t=0$. The coefficient of friction between the ring and the table,if the ring starts rotating at $t = 2 \, s$,is: