$A$ metallic ring of radius $r$ and cross-sectional area $A$ is fitted into a wooden circular disc of radius $R$ $(R > r)$. If the Young's modulus of the material of the ring is $Y$, the force with which the metal ring expands is

$A$ wire of cross-sectional area $A$,modulus of elasticity $2 \times 10^{11} \text{ N m}^{-2}$,and length $2L = 2 \text{ m}$ is stretched between two vertical rigid supports. When a mass of $2 \text{ kg}$ is suspended at the middle,it sags from its original position,making an angle $\theta = \frac{1}{100} \text{ radian}$ with the horizontal at the points of support. The value of $A$ is . . . . . . $\times 10^{-4} \text{ m}^2$. (Given: $g = 10 \text{ m/s}^2$)

$A$ cylindrical rod made of aluminum has a length of $1 \,m$ and a diameter of $10 \,cm$. The rod is subjected to a tensile force of $100 \,kN$. Calculate the elongation in the rod. (Young's modulus of aluminum $= 70 \,GPa$)

The Young's modulus for steel is much more than that for rubber. For the same longitudinal strain,which one will have greater tensile stress?

Steel and copper wires of the same length are stretched by the same weight one after the other. The Young's modulus of steel and copper are $2 \times 10^{11} \, N/m^2$ and $1.2 \times 10^{11} \, N/m^2$,respectively. What is the ratio of the increase in their lengths?

$A$ copper wire $(Y = 1 \times 10^{11} \, N/m^2)$ of length $6 \, m$ and a steel wire $(Y = 2 \times 10^{11} \, N/m^2)$ of length $4 \, m$,each of cross-sectional area $10^{-5} \, m^2$,are fastened end to end and stretched by a tension of $100 \, N$. The elongation produced in the copper wire is ......... $mm$.