A wire of cross-sectional area A,modulus of e | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) For the equilibrium of the mass in the vertical direction,the vertical components of the tension $T$ in the wire must balance the weight of the ma

Vedclass · Accepted Answer

$1$

Vedclass · Answer

(C) For the equilibrium of the mass in the vertical direction,the vertical components of the tension $T$ in the wire must balance the weight of the mass:$2T \sin 	heta = mg$Given $m = 2 	ext{ kg}$,$g = 10 	ext{ m/s}^2$,and $	heta = \frac{1}{100} 	ext{ rad}$. Using the small angle approximation $\sin 	heta \approx 	heta$:$2T 	heta = 20$$T = \frac{10}{	heta} = \frac{10}{1/100} = 1000 	ext{ N}$The original length of the wire is $2L = 2 	ext{ m}$,so $L = 1 	ext{ m}$.The new length of the wire is $2 \sqrt{L^2 + x^2}$,where $x = L 	an 	heta \approx L 	heta$.The change in length $\Delta L$ is:$\Delta L = 2 \sqrt{L^2 + x^2} - 2L = 2L \left( \sqrt{1 + 	an^2 	heta} - 1 ight) \approx 2L \left( 1 + \frac{	an^2 	heta}{2} - 1 ight) = L 	an^2 	heta \approx L 	heta^2$$\Delta L = 1 	imes (1/100)^2 = 10^{-4} 	ext{ m}$Using Young's modulus $Y = \frac{T/A}{\Delta L / (2L)}$:$2 	imes 10^{11} = \frac{1000 / A}{10^{-4} / 2}$$2 	imes 10^{11} = \frac{2000}{A 	imes 10^{-4}}$$A = \frac{2000}{2 	imes 10^{11} 	imes 10^{-4}} = \frac{1000}{10^7} = 10^{-4} 	ext{ m}^2$Thus,the value of $A$ is $1 	imes 10^{-4} 	ext{ m}^2$.

Similar Questions

The adjacent graph shows the extension $(\Delta l)$ of a wire of length $1\, m$ suspended from the top of a roof at one end and with a load $W$ connected to the other end. If the cross-sectional area of the wire is $10^{-6}\, m^2$,calculate the Young's modulus of the material of the wire.

When a weight is suspended from the end of an elastic spring,its increased length depends upon what?

To break a wire of $1 \, m$ length, a minimum weight of $40 \, kg \, wt$ is required. Then, the wire of the same material with double the radius and $6 \, m$ length will require a breaking weight of ....... $kg \, wt$.

When a weight of $10 \,kg$ is suspended from a copper wire of length $3 \,m$ and diameter $0.4 \,mm$, its length increases by $2.4 \,cm$. If the diameter of the wire is doubled, then the extension in its length will be (in $\,cm$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module