When a weight is suspended from the end of an elastic spring,its increased length depends upon what?

$A$ rod of length $l$ and area of cross-section $A$ is heated from $0^{\circ}C$ to $100^{\circ}C$. The rod is so placed that it is not allowed to increase in length,then the force developed is proportional to

If the given graph shows the load $(W)$ attached to and the elongation $(\Delta l)$ produced in a wire of length $1 \,m$ and area of cross-section $1 \,mm^2$, then the Young's modulus of the material of the wire is

$A$ wire of length $L$ and radius $r$ is clamped at one end. If its other end is pulled by a force $F$,its length increases by $l$. If the radius of the wire and the applied force both are reduced to half of their original values keeping original length constant,the increase in length will become.

$A$ uniform plank of Young's modulus $Y$ is moved over a smooth horizontal surface by a constant horizontal force $F$. The area of cross-section of the plank is $A$. The compressive strain on the plank in the direction of the force is

$A$ load of $1 \,kg$ weight is attached to one end of a steel wire of area of cross-section $3 \,mm^2$ and Young's modulus $10^{11} \,N/m^2$. The other end is suspended vertically from a hook on a wall, then the load is pulled horizontally and released. When the load passes through its lowest position, the fractional change in length is $(g = 10 \,m/s^2)$.