$A$ string of length $100 \,cm$ has three resonant frequencies, $120 \,Hz, 200 \,Hz$ and $280 \,Hz$. If a node is formed at the end of the string, the speed of the transverse wave on this string is : (in $\,m/s$)

One insulated conductor from a household extension cord has a mass per unit length of $\mu$. $A$ section of this conductor is held under tension between two clamps. $A$ subsection is located in a magnetic field of magnitude $B$ directed perpendicular to the length of the cord. When the cord carries an $AC$ current of $i$ at a frequency of $f$,it vibrates in resonance in its simplest standing-wave vibration state. Determine the relationship that must be satisfied between the separation $d$ of the clamps and the tension $T$ in the cord.

$A$ stone is hung in air from a wire which is stretched over a sonometer. The bridges of the sonometer are $L \, cm$ apart when the wire is in unison with a tuning fork of frequency $N$. When the stone is completely immersed in water,the length between the bridges is $l \, cm$ for re-establishing unison. The specific gravity of the material of the stone is:

When a string of length $l$ is divided into three segments of length $l_1, l_2$ and $l_3$,the fundamental frequencies of the three segments are $n_1, n_2$ and $n_3$ respectively. The original fundamental frequency $n$ of the string is:

Answer the following by appropriately matching the lists based on the information given in the paragraph.
$A$ musical instrument is made using four different metal strings,$1, 2, 3$ and $4$ with mass per unit length $\mu, 2\mu, 3\mu$ and $4\mu$ respectively. The instrument is played by vibrating the strings by varying the free length in between the range $L_0$ and $2L_0$. It is found that in string-$1$ $(\mu)$ at free length $L_0$ and tension $T_0$ the fundamental mode frequency is $f_0$.
$List-I$ gives the above four strings while $List-II$ lists the magnitude of some quantity.

$List-I$	$List-II$
$(I)$ String-$1$ $(\mu)$	$(P) 1$
$(II)$ String-$2$ $(2\mu)$	$(Q) 1/2$
$(III)$ String-$3$ $(3\mu)$	$(R) 1/\sqrt{2}$
$(IV)$ String-$4$ $(4\mu)$	$(S) 1/\sqrt{3}$
	$(T) 3/16$
	$(U) 1/16$

$(1)$ If the tension in each string is $T_0$,the correct match for the fundamental frequency in $f_0$ units will be,
$(1)$ $I \rightarrow P, II \rightarrow R, III \rightarrow S, IV \rightarrow Q$
$(2)$ $I \rightarrow P, II \rightarrow Q, III \rightarrow T, IV \rightarrow S$
$(3)$ $I \rightarrow Q, II \rightarrow S, III \rightarrow R, IV \rightarrow P$
$(4)$ $I \rightarrow Q, II \rightarrow P, III \rightarrow R, IV \rightarrow T$
$(2)$ The lengths of the strings $1, 2, 3$ and $4$ are kept fixed at $L_0, 3L_0/2, 5L_0/4$ and $7L_0/4$,respectively. Strings $1, 2, 3$ and $4$ are vibrated at their $1^{st}, 3^{rd}, 5^{th}$ and $14^{th}$ harmonics,respectively,such that all the strings have the same frequency. The correct match for the tension in the four strings in the units of $T_0$ will be.
$(1)$ $I \rightarrow P, II \rightarrow Q, III \rightarrow T, IV \rightarrow U$
$(2)$ $I \rightarrow T, II \rightarrow Q, III \rightarrow R, IV \rightarrow U$
$(3)$ $I \rightarrow P, II \rightarrow Q, III \rightarrow R, IV \rightarrow T$
$(4)$ $I \rightarrow P, II \rightarrow R, III \rightarrow T, IV \rightarrow U$

$A$ tuning fork is sounded with a sonometer wire of length $95 \, cm$ or $100 \, cm$,producing $4$ beats per second in both cases. What is the frequency of the tuning fork in $Hz$?