The ratio of Young's modulus of three wires is $2 : 2 : 1$ and the ratio of their cross-sectional areas is $1 : 2 : 3$. If the same force is applied to each,what is the ratio of the increase in their lengths?

The following four wires are made of the same material. Which of these will have the largest extension when the same tension is applied?

In an experiment to determine the Young's modulus of a wire of length exactly $1\;m$,the extension in the length of the wire is measured as $0.4\;mm$ with an uncertainty of $\pm 0.02\;mm$ when a load of $1\;kg$ is applied. The diameter of the wire is measured as $0.4\;mm$ with an uncertainty of $\pm 0.01\;mm$. The error in the measurement of Young's modulus $(\Delta Y)$ is found to be $x \times 10^{10}\;N/m^2$. The value of $x$ is (Take $g = 10\;m/s^2$)

$(a)$ $A$ steel wire of mass $\mu$ per unit length with a circular cross-section has a radius of $0.1\,cm$. The wire is of length $10\,m$ when measured lying horizontal and hangs from a hook on the wall. $A$ mass of $25\,kg$ is hung from the free end of the wire. Assuming the wire to be uniform and lateral strains $\ll$ longitudinal strains,find the extension in the length of the wire. The density of steel is $7860\,kg/m^3$ and Young's modulus $Y = 2 \times 10^{11}\,N/m^2$.
$(b)$ If the yield strength of steel is $2.5 \times 10^8\,N/m^2$,what is the maximum weight that can be hung at the lower end of the wire?

$A$ metallic rod having area of cross-section $A$,Young's modulus $Y$,coefficient of linear expansion $\alpha$,and length $L$ is tied between two strong pillars. If the rod is heated through a temperature $t \, ^\circ C$,then how much force is produced in the rod?

Two wires $A$ and $B$ are of the same material. Their lengths are in the ratio $1: 2$ and diameters are in the ratio $2: 1$. When stretched by forces $F_{A}$ and $F_{B}$ respectively,they get equal increase in their lengths. Then the ratio $F_{A} / F_{B}$ is