$A$ galvanometer with a resistance of $8 \, \Omega$ is connected to a shunt of $2 \, \Omega$. If the total current is $1 \, A$,how much current in $A$ passes through the shunt?

$A$ $50\, \Omega$ galvanometer gets full-scale deflection when a current of $0.01\, A$ passes through the coil. When it is converted to a $10\, A$ ammeter,the shunt resistance is ........... $\Omega$.

An ideal ammeter and an ideal voltmeter have resistances of . . . . . . $\Omega$ and . . . . . . $\Omega$ respectively.

$A$ galvanometer has resistance $G$ and range $V_g$. How much resistance is required to read voltage up to $V$ volt?

The coil of a galvanometer consists of $100$ turns and an effective area of $1 \, cm^2$. The restoring couple per unit radian is $10^{-8} \, N \cdot m/rad$. The magnetic field between the pole pieces is $5 \, T$. The current sensitivity of this galvanometer will be:

In a moving coil galvanometer,two moving coils $M_1$ and $M_2$ have the following particulars:
$R_1 = 5 \ \Omega, N_1 = 15, A_1 = 3.6 \times 10^{-3} \ m^2, B_1 = 0.25 \ T$
$R_2 = 7 \ \Omega, N_2 = 21, A_2 = 1.8 \times 10^{-3} \ m^2, B_2 = 0.50 \ T$
Assuming that the torsional constant of the springs is the same for both coils,what will be the ratio of the voltage sensitivity of $M_1$ and $M_2$?