$A$ galvanometer coil has $100$ turns and an area of $1 \, cm^2$. The restoring torque constant of the coil is $10^{-8} \, N-m/rad$. If the magnetic field is $5 \, T$,what is the current sensitivity?

$A$ galvanometer has resistance $G$ and range $V_g$. How much resistance is required to read voltage up to $V$ volt?

Two similar galvanometers are converted into an ammeter and a milliammeter. The shunt resistance of the ammeter as compared to the shunt resistance of the milliammeter will be

In an experiment to find the resistance of a galvanometer by the half-deflection method, a $5 V$ battery and a high resistance of $4.9 k\Omega$ are connected in the circuit. In the absence of any shunt resistance, the galvanometer reads $20$ divisions when current flows in the circuit. To reduce the deflection by half, the value of the shunt resistance used is $98 \Omega$. The figure of merit of the galvanometer is given as $..... \mu A / \text{division}$.

An ammeter with internal resistance $90\,\Omega$ reads $1.85\,A$ when connected in a circuit containing a battery and two resistors $700\,\Omega$ and $410\,\Omega$ in series. The actual current in the circuit (without the ammeter) will be:

The deflection in a galvanometer falls to $\left(\frac{1}{4}\right)^{th}$ of its initial value when it is shunted by a resistor of $3 \Omega$. If an additional shunt of $2 \Omega$ is connected in parallel to the earlier shunt,the deflection in the galvanometer falls to: