$A$ coil having $100$ turns, area of $5 \times 10^{-3} \, m^2$, carrying current of $1 \, mA$ is placed in a uniform magnetic field of $0.20 \, T$ such that the plane of the coil is perpendicular to the magnetic field. The work done in turning the coil through $90^{\circ}$ is . . . . . . $\mu J$.

$A$ current-carrying coil is subjected to a uniform magnetic field. The coil will orient itself so that its plane becomes

The torque required to hold a small circular coil of $10$ turns, area $1 \,mm^{2}$ and carrying a current of $\left(\frac{21}{44}\right) \,A$ in the middle of a long solenoid of $10^{3} \,turns/m$ carrying a current of $2.5 \,A$, with its axis perpendicular to the axis of the solenoid is

$A$ circular coil of radius $R$ and $N$ turns has negligible resistance. As shown in the schematic figure,its two ends are connected to two wires and it is hanging by those wires with its plane being vertical. The wires are connected to a capacitor with charge $Q$ through a switch. The coil is in a horizontal uniform magnetic field $B_0$ parallel to the plane of the coil. When the switch is closed,the capacitor gets discharged through the coil in a very short time. By the time the capacitor is discharged fully,the magnitude of the angular momentum gained by the coil will be (assume that the discharge time is so short that the coil has hardly rotated during this time):

$A$ rectangular coil of $400$ turns and $10^{-2} \ m^2$ area, carrying a current of $0.5 \ A$ is placed in a uniform magnetic field of $1 \ T$ such that the plane of the coil makes an angle of $60^{\circ}$ with the direction of the magnetic field. The initial moment of force acting on the coil in $Nm$ is

$A$ square loop of side $l$ is kept in a uniform magnetic field $B$ such that its plane makes an angle $\alpha$ with $\vec{B}$. The loop carries a current $i$. The torque experienced by the loop in this position is