$A$ force is applied to a steel wire '$A$',rigidly clamped at one end. As a result,the elongation in the wire is $0.2\,mm$. If the same force is applied to another steel wire '$B$' of double the length and a diameter $2.4$ times that of the wire '$A$',the elongation in the wire '$B$' will be $............\times 10^{-2}\,mm$ (wires having uniform circular cross sections).

$A$ wire of length $0.5 \ m$ and area of cross-section $4 \times 10^{-6} \ m^2$ at a temperature of $100^{\circ} C$ is suspended vertically by fixing its upper end to the ceiling. The wire is then cooled to $0^{\circ} C$,but is prevented from contracting,by attaching a mass at the lower end. If the mass of the wire is negligible,then the value of the mass attached to the wire is (Young's modulus of material of the wire $= 10^{11} \ N \ m^{-2}$; coefficient of linear expansion of the material of the wire $= 10^{-5} \ K^{-1}$ and acceleration due to gravity $= 10 \ m \ s^{-2}$) (in $kg$)

To break a wire of $1 \, m$ length, a minimum weight of $40 \, kg \, wt$ is required. Then, the wire of the same material with double the radius and $6 \, m$ length will require a breaking weight of ....... $kg \, wt$.

When a load $W$ is hung from a wire of length $2L$,it just breaks. Now this wire is completely melted and a new wire of length $L$ is formed. If the load $W$ is hung from this new wire,what happens?

$A$ metallic ring of radius $r$ and cross-sectional area $A$ is fitted into a wooden circular disc of radius $R$ $(R > r)$. If the Young's modulus of the material of the ring is $Y$, the force with which the metal ring expands is

Two wires of equal length and cross-section are suspended as shown. Their Young's moduli are $Y_1$ and $Y_2$ respectively. The equivalent Young's modulus will be