$A$ force of $200\, N$ is applied at one end of a wire of length $2\, m$ and having area of cross-section $10^{-2}\, cm^2$. The other end of the wire is rigidly fixed. If the coefficient of linear expansion of the wire is $\alpha = 8 \times 10^{-6}\, ^\circ C^{-1}$,Young's modulus is $Y = 2.2 \times 10^{11}\, N/m^2$,and its temperature is increased by $5\, ^\circ C$,then the increase in the tension of the wire will be ........ $N$.

The extension of a wire by the application of load is $3 \ mm$. The extension in a wire of the same material and length but half the radius by the same load is..... $mm$.

$A$ student performs an experiment to determine the Young's modulus of a wire, exactly $2 \,m$ long, by Searle's method. In a particular reading, the student measures the extension in the length of the wire to be $0.8 \,mm$ with an uncertainty of $\pm 0.05 \,mm$ at a load of exactly $1.0 \,kg$. The student also measures the diameter of the wire to be $0.4 \,mm$ with an uncertainty of $\pm 0.01 \,mm$. Take $g=9.8 \,m/s^2$ (exact). The Young's modulus obtained from the reading is

$A$ uniform cylindrical rod of length $L$ and radius $r$ is made from a material whose Young's modulus of elasticity equals $Y$. When this rod is heated by temperature $T$ and simultaneously subjected to a net longitudinal compressional force $F$,its length remains unchanged. The coefficient of volume expansion of the material of the rod is (nearly) equal to:

When the temperature of a wire of length $L_0$ is increased by $T$,what is the energy density? The volume expansion coefficient of the wire is $\gamma$ and the Young's modulus is $Y$.

Overall changes in volume and radii of a uniform cylindrical steel wire are $0.2 \%$ and $0.002 \%$ respectively when subjected to some suitable force. Calculate the longitudinal tensile stress acting on the wire. (Given: Young's modulus $Y = 2.0 \times 10^{11} \ N/m^2$)