The extension of a wire by the application of load is $3 \ mm$. The extension in a wire of the same material and length but half the radius by the same load is..... $mm$.

The area of a cross-section of a steel wire is $0.1 \, cm^2$ and Young's modulus of steel is $2 \times 10^{11} \, N \, m^{-2}$. The force required to stretch it by $0.1 \%$ of its original length is ......... $N$.

One end of a horizontal thick copper wire of length $2L$ and radius $2R$ is welded to an end of another horizontal thin copper wire of length $L$ and radius $R$. When the arrangement is stretched by applying forces at two ends,the ratio of the elongation in the thin wire to that in the thick wire is:

$A$ rigid bar of mass $15\; kg$ is supported symmetrically by three wires each $2.0\; m$ long. Those at each end are of copper and the middle one is of iron. Determine the ratio of their diameters if each is to have the same tension.

The mass and length of a wire are $M$ and $L$ respectively. The density of the material of the wire is $d$. On applying a force $F$ on the wire,the increase in length is $l$. Then,the Young's modulus of the material of the wire will be:

$A$ rod is fixed between two points at $20\,^oC$. The coefficient of linear expansion of the material of the rod is $1.1 \times 10^{-5}/\,^oC$ and Young's modulus is $1.2 \times 10^{11}\,N/m^2$. Find the stress developed in the rod if the temperature of the rod becomes $10\,^oC$.