$A$ metallic bar of Young's modulus $0.5 \times 10^{11} \,N \,m^{-2}$, coefficient of linear thermal expansion $10^{-5} \,^{\circ}C^{-1}$, length $1 \,m$, and area of cross-section $10^{-3} \,m^2$ is heated from $0^{\circ}C$ to $100^{\circ}C$ without expansion or bending. The compressive force developed in it is:

$A$ piece of copper having a rectangular cross-section of $15.2 \; mm \times 19.1 \; mm$ is pulled in tension with $44,500 \; N$ force,producing only elastic deformation. Calculate the resulting strain.

$A$ wire of length $2\, m$ is made from $10\, cm^3$ of copper. $A$ force $F$ is applied so that its length increases by $2\, mm$. Another wire of length $8\, m$ is made from the same volume of copper. If the same force $F$ is applied to it,its length will increase by ......... $cm$.

The length of a metal wire is $L$, when it is subjected to tension $T$. If the tension is increased to $T+\Delta T$, the length becomes $L+\Delta L$. The natural length of the wire is

$A$ uniform steel rod of mass $1.8 \,kg$ and length $0.8 \,m$ is hung from a nail with the help of two steel wires,each of area of cross-section $0.01 \,mm^2$ and unstretched length $0.5 \,m$,as shown in the figure. The centre of mass of the rod lies vertically below the nail. The increase in the distance between the centre of mass of the rod and the nail due to stretching of the wires as the rod hangs is . . . . . . $mm$. (Young's modulus of steel $= 2 \times 10^{11} \,N/m^2$ and acceleration due to gravity $= 10 \,m/s^2$)

Write the unit and dimensional formula of modulus of elasticity.