A resistance of 400,Omega is connected in ser | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Given: $R = 400\,\Omega$,$L = (3/\pi)\,H$,$e = 400 \sin(100\pi t)$.Comparing with $e = E_0 \sin(\omega t)$,we get $E_0 = 400\,V$ and $\omega = 100

Vedclass · Accepted Answer

In the circuit,the potential difference across the resistance is in the same phase as the current.

Vedclass · Answer

(B) Given: $R = 400\,\Omega$,$L = (3/\pi)\,H$,$e = 400 \sin(100\pi t)$.Comparing with $e = E_0 \sin(\omega t)$,we get $E_0 = 400\,V$ and $\omega = 100\pi\,rad/s$.Inductive reactance $X_L = \omega L = 100\pi 	imes (3/\pi) = 300\,\Omega$.Impedance $Z = \sqrt{R^2 + X_L^2} = \sqrt{400^2 + 300^2} = 500\,\Omega$.Peak current $I_0 = E_0 / Z = 400 / 500 = 0.8\,A = (4/5)\,A$. Thus,option $(a)$ is incorrect.In a series $RL$ circuit,the potential difference across the resistor is always in phase with the current. Thus,option $(b)$ is correct.The potential difference across an inductor always leads the current by $90^{\circ}$. Thus,options $(c)$ and $(d)$ are incorrect.

$A$ resistance of $400\,\Omega$ is connected in series with an inductor of $(3/\pi)\,H$ and this combination is connected across an $A.C.$ source as shown in the figure,where $e = 400 \sin(100\pi t)$. Which of the following statements is correct?

Similar Questions

$A$ light bulb and an inductor coil are connected to an $AC$ source through a key as shown in the figure below. The key is closed and after some time an iron rod is inserted into the interior of the inductor. The glow of the light bulb

If $L$ and $R$ are respectively the inductance and resistance,then the dimensions of $\frac{R}{L}$ will be

The power factor of an $R-L$ circuit is $\frac{1}{\sqrt{2}}$. If the frequency of $AC$ is doubled,the power factor will now be

In a circuit made up of a resistance $4\,\Omega$ and an inductance $0.01\,H$,an alternating $emf$ of $200\,V$ at $50\,Hz$ is connected. The phase difference between the current and the $emf$ in the circuit is:

$A$ resistance of $200 \ \Omega$ and an inductor of $\frac{1}{2 \pi} \ H$ are connected in series to an a.c. voltage of $40 \ V$ and $100 \ Hz$ frequency. The phase angle between the voltage and current is

Vedclass Test Series

Exam Paper Generator

Online Exam Module