A steady current I flows through a wire of ra | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The rate of heat generated in the wire is given by $Q_2 = I^2 R$. Since resistance $R = \frac{\rho L}{\pi r^2}$,we have $Q_2 = \frac{I^2 \rho L}{\

Vedclass · Accepted Answer

$L$

Vedclass · Answer

(A) The rate of heat generated in the wire is given by $Q_2 = I^2 R$. Since resistance $R = \frac{\rho L}{\pi r^2}$,we have $Q_2 = \frac{I^2 \rho L}{\pi r^2}$.The rate of heat loss $Q_1$ is proportional to the surface area $A = 2 \pi r L$. Thus,$Q_1 = k (2 \pi r L) \Delta T$,where $k$ is a constant and $\Delta T$ is the temperature difference.In a steady state,the rate of heat generated equals the rate of heat loss: $Q_2 = Q_1$.$\frac{I^2 \rho L}{\pi r^2} = k (2 \pi r L) \Delta T$.Solving for $\Delta T$: $\Delta T = \frac{I^2 \rho L}{\pi r^2 \cdot 2 \pi r L k} = \frac{I^2 \rho}{2 \pi^2 r^3 k}$.Since the length $L$ cancels out from both sides,the steady-state temperature difference $\Delta T$ is independent of the length $L$ of the wire.

$A$ steady current $I$ flows through a wire of radius $r$,length $L$ and resistivity $\rho$. The current produces heat in the wire. The rate of heat loss in a wire is proportional to its surface area. The steady temperature of the wire is independent of

Similar Questions

In a large building,there are $15$ bulbs of $40\ W$,$5$ bulbs of $100\ W$,$5$ fans of $80\ W$,and $1$ heater of $1\ kW$. The voltage of the electric mains is $220\ V$. The minimum capacity of the main fuse of the building will be ................ $A$.

Why is electric power transmitted at very high voltage over long distances to reduce Ohmic loss?

$A$ $220\, V$,$1000\, W$ bulb is connected across a $110\, V$ mains supply. The power consumed will be ............ $W$.

The resistance of a bulb filament changes with temperature. If a bulb rated at $220 \ V$ and $100 \ W$ is connected to a supply of $(220 \times 0.8) \ V$,the actual power consumed will be:

$A$ bulb has a specification of $1\, kW$ and $250\, V$. The resistance of the bulb is .................. $\Omega$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module