$A$ steel ring of radius $r$ and cross-section area $A$ is fitted onto a wooden disc of radius $R$ $(R > r)$. If Young's modulus is $E$,then the force with which the steel ring is expanded is

$A$ steel wire of $1 \, m$ long and $1 \, mm^2$ cross-sectional area is hung from a rigid support. When a weight of $1 \, kg$ is hung from it,the change in length will be given by ..... $mm$ $(Y = 2 \times 10^{11} \, N/m^2, g = 10 \, m/s^2)$.

$A$ metallic rod $1 \, cm$ long with a square cross-section is heated through $1^{\circ} C$. If Young's modulus of elasticity of the metal is $E$ and the mean coefficient of linear expansion is $\alpha$ per degree Celsius,then the compressional force required to prevent the rod from expanding along its length is: (Neglect the change of cross-sectional area)

$A$ rigid massless rod of length $6L$ is suspended horizontally by means of two elastic rods $PQ$ and $RS$ as shown in the figure. Their area of cross-section,Young's modulus,and lengths are mentioned in the figure. Find the deflection of end $S$ in the equilibrium state. The free end of the rigid rod is pushed down by a constant force $F$. $A$ is the area of cross-section,$Y$ is Young's modulus of elasticity.

The length of a wire becomes $l_1$ and $l_2$ when $100\,N$ and $120\,N$ tensions are applied respectively. If $10l_2 = 11l_1$,the natural length of the wire will be $\frac{1}{x} l_1$. Here,the value of $x$ is ........

When the temperature of a wire of length $L_0$ is increased by $T$,what is the energy density? The volume expansion coefficient of the wire is $\gamma$ and the Young's modulus is $Y$.