$A$ steel wire is $1 \,m$ long and $1 \,mm^2$ in area of cross-section. If it takes $200 \,N$ to stretch this wire by $1 \,mm$,how much force will be required to stretch a wire of the same material as well as diameter from its normal length of $10 \,m$ to a length of $1002 \,cm$?

$A$ uniform rod of mass $m$,length $L$,area of cross-section $A$ and Young's modulus $Y$ hangs from the ceiling. Its elongation under its own weight will be

$A$ load of $1 \,kg$ weight is attached to one end of a steel wire of area of cross-section $3 \,mm^2$ and Young's modulus $10^{11} \,N/m^2$. The other end is suspended vertically from a hook on a wall, then the load is pulled horizontally and released. When the load passes through its lowest position, the fractional change in length is $(g = 10 \,m/s^2)$.

$A$ rubber cord $10\, m$ long is suspended vertically. How much does it stretch under its own weight? (Density of rubber is $1500\, kg/m^3$,$Y = 5 \times 10^8\, N/m^2$,$g = 10\, m/s^2$)

$A$ rod of length $l$ and area of cross-section $A$ is heated from $0^{\circ}C$ to $100^{\circ}C$. The rod is so placed that it is not allowed to increase in length,then the force developed is proportional to

Evaluate the following statements:
$(a)$ Young's modulus of a rigid body is .....
$(b)$ $A$ wire increases by $10^{-6}$ times its original length when a stress of $10^8 \ N/m^2$ is applied to it. Calculate its Young's modulus.
$(c)$ The value of Poisson's ratio for steel is ......