$A$ steel wire of length $3.2 \, m$ $(Y_{S} = 2.0 \times 10^{11} \, N/m^{2})$ and a copper wire of length $4.4 \, m$ $(Y_{C} = 1.1 \times 10^{11} \, N/m^{2})$,both of radius $1.4 \, mm$,are connected end to end. When stretched by a load,the net elongation is found to be $1.4 \, mm$. The load applied,in Newtons,is. (Given $\pi = \frac{22}{7}$)

$A$ force is applied to a steel wire '$A$',rigidly clamped at one end. As a result,the elongation in the wire is $0.2\,mm$. If the same force is applied to another steel wire '$B$' of double the length and a diameter $2.4$ times that of the wire '$A$',the elongation in the wire '$B$' will be $............\times 10^{-2}\,mm$ (wires having uniform circular cross sections).

As shown in the figure,a light uniform rod $PQ$ of length $150 \ cm$ is suspended from the ceiling horizontally using two metal wires $A$ and $B$ tied to the ends of the rod. The ratios of the radii and the Young's moduli of the materials of the two wires $A$ and $B$ are respectively $2:3$ and $3:2$. The position at which a weight should be suspended from the rod such that the elongations of the two wires become equal is

Increase in length of a wire is $1 \, mm$ when suspended by a weight. If the same weight is suspended on a wire of double its length and double its radius,the increase in length will be ........ $mm$.

What is the effect of change in temperature on the Young's modulus?

Three bars having lengths $l, 2l$,and $3l$ and areas of cross-section $A, 2A$,and $3A$ are joined rigidly end to end. The compound rod is subjected to a stretching force $F$. The total increase in the length of the rod is (Young's modulus of the material is $Y$ and the bars are massless).