$A$ uniform but time-varying magnetic field $B(t)$ exists in a circular region of radius $a$ and is directed into the plane of the paper,as shown. The magnitude of the induced electric field at point $P$ at a distance $r$ $(r > a)$ from the centre of the circular region is:

$A$ uniform magnetic field $B$ exists in a cylindrical region of radius $R = 10 \, cm$ as shown in the figure. $A$ uniform wire of length $L = 80 \, cm$ and resistance $R_{wire} = 4.0 \, \Omega$ is bent into a square frame of side length $a = 20 \, cm$ and is placed with one side along a diameter of the cylindrical region. If the magnetic field increases at a constant rate of $\frac{dB}{dt} = 0.010 \, T/s$,find the current induced in the frame.

Two concentric circular coils,$C_{1}$ and $C_{2}$,are placed in the $XY$ plane. $C_{1}$ has $500$ turns and a radius of $1\; cm$. $C_{2}$ has $200$ turns and a radius of $20\; cm$. $C_{2}$ carries a time-dependent current $I(t) = (5t^{2} - 2t + 3)\; A$,where $t$ is in $s$. The $emf$ induced in $C_{1}$ (in $mV$) at the instant $t = 1\; s$ is $\frac{4}{x}$. The value of $x$ is:

In the branch $AB$ of a circuit,as shown in the figure,a current $I = (t + 2) \ A$ is flowing,where $t$ is the time in seconds. At $t = 0$,the value of $(V_A - V_B)$ will be: (in $V$)

At time $t=0$, a magnetic field of $1000 \; \text{Gauss}$ is passing perpendicularly through the area defined by the closed loop shown in the figure. If the magnetic field reduces linearly to $500 \; \text{Gauss}$ in the next $5 \; \text{s}$, then the induced $EMF$ in the loop is ........ $\mu \text{V}$.

$A$ uniform magnetic field $B$ exists in a cylindrical region of radius $10\, cm$ as shown in the figure. $A$ uniform wire of length $80\, cm$ and resistance $4.0\,\Omega$ is bent into a square frame and is placed with one side along a diameter of the cylindrical region. If the magnetic field increases at a constant rate of $0.010\, T/s$,find the current induced in the frame.