$A$ uniform magnetic field $B$ exists in a direction perpendicular to the plane of a square loop made of a metal wire. The wire has a diameter of $4 \, mm$ and a total length of $30 \, cm$. The magnetic field changes with time at a steady rate $dB/dt = 0.032 \, T s^{-1}$. The induced current in the loop is close to $.... A$ (Resistivity of the metal wire is $1.23 \times 10^{-8} \, \Omega m$).

$A$ magnetic field given by $B(t) = (0.2t - 0.05t^2) \text{ T}$ is directed perpendicular to the plane of a circular coil containing $25$ turns of radius $1.8 \text{ cm}$ and whose total resistance is $5 \Omega$. The power dissipation at $3 \text{ s}$ is nearly: (in $\text{ } \mu\text{W}$)

$A$ uniform magnetic field $B$ exists in a cylindrical region of radius $10\,cm$ as shown in the figure. $A$ uniform wire of length $80\,cm$ and resistance $4.0\,\Omega$ is bent into a square frame and is placed with one side along a diameter of the cylindrical region. If the magnetic field increases at a constant rate of $0.010\,T/s$,find the current induced in the frame.

$A$ uniform magnetic field of induction $B$ is confined to a cylindrical region of radius $R$. The magnetic field is increasing at a constant rate of $\frac{dB}{dt} \text{ (T/s)}$. $A$ proton of charge $e$ and mass $m$ is placed at point $P$ on the periphery. Its acceleration is

$A$ charged particle of charge $q$ and mass $m$ is placed at a distance $2R$ from the centre of a vertical cylindrical region of radius $R$ where the magnetic field varies as $\vec{B} = (4t^2 - 2t + 6) \hat{k}$, where $t$ is time. Then which of the following statement$(s)$ is/are true?

$A$ rectangular wire loop of sides $8 \; cm$ and $2 \; cm$ with a small cut is moving out of a region of uniform magnetic field of magnitude $0.3 \; T$ directed normal to the loop. Suppose the loop is stationary but the current feeding the electromagnet that produces the magnetic field is gradually reduced so that the field decreases from its initial value of $0.3 \; T$ at the rate of $0.02 \; T \, s^{-1}$. If the cut is joined and the loop has a resistance of $1.6 \; \Omega$,how much power is dissipated by the loop as heat? What is the source of this power?