$A$ vessel of area of cross-section $A$ has liquid to a height $H$. There is a hole at the bottom of the vessel having area of cross-section $a$. The time taken to decrease the level from $H_1$ to $H_2$ will be:

  • A
    $\frac{A}{a}\sqrt {\frac{2}{g}} [\sqrt {{H_1}} - \sqrt {{H_2}} ]$
  • B
    $\sqrt {2gH}$
  • C
    $\sqrt {2g({H_1} - {H_2})}$
  • D
    $\frac{A}{a}\sqrt {\frac{g}{2}} [\sqrt {{H_1}} - \sqrt {{H_2}} ]$

Explore More

Similar Questions

There are two holes, one each along the opposite sides of a wide rectangular tank. The cross-section of each hole is $0.01 \,m^2$ and the vertical distance between the holes is $1 \,m$. The tank is filled with water. The net force on the tank in newton when the water flows out of the holes is (Density of water $= 1000 \,kg/m^3$, $g = 10 \,m/s^2$)

$A$ cylindrical vessel filled with water up to a height of $H$ stands on a horizontal plane. The side wall of the vessel has a plugged circular hole touching the bottom. The coefficient of friction between the bottom of the vessel and the plane is $\mu$ and the total mass of the water plus the vessel is $M$. What should be the minimum diameter of the hole so that the vessel begins to move on the floor if the plug is removed? (Here,the density of water is $\rho$)

Difficult
View Solution

Water $(\rho_1=1000 \, kg/m^3)$ and kerosene $(\rho_2=800 \, kg/m^3)$ are filled to the same height in two identical cylindrical vessels. Both vessels have small holes at their bottom. The speeds of the water and kerosene coming out of their holes are $v_1$ and $v_2$ respectively. Select the correct alternative.

Two large,identical water tanks,$1$ and $2$,kept on the top of a building of height $H$,are filled with water up to height $h$ in each tank. Both the tanks contain an identical hole of small radius on their sides,close to their bottom. $A$ pipe of the same internal radius as that of the hole is connected to tank $2$,and the pipe ends at the ground level. When the water flows out of tanks $1$ and $2$ through the holes,the times taken to empty the tanks are $t_1$ and $t_2$,respectively. If $H = (16/9) h$,then the ratio $t_1 / t_2$ is:

$A$ square hole of side length $l$ is made at a depth of $h$ and a circular hole of radius $r$ is made at a depth of $4h$ from the surface of water in a water tank kept on a horizontal surface. If $l << h$ and $r << h$,and the rate of water flow from the holes is the same,then $r$ is equal to:

Difficult
View Solution

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo