$A$ wire of cross-sectional area $3 \, mm^2$ is first stretched between two fixed points at a temperature of $20^{\circ}C$. Determine the tension in the wire when the temperature falls to $10^{\circ}C$. Given: Coefficient of linear expansion $\alpha = 10^{-5} \, ^{\circ}C^{-1}$ and Young's modulus $Y = 2 \times 10^{11} \, N/m^2$.

$A$ steel wire of length $20 \text{ cm}$ and area of cross-section $1 \text{ mm}^2$ is tied rigidly at both the ends. When the temperature of the wire is changed from $40^{\circ} \text{C}$ to $20^{\circ} \text{C}$, find the change in its tension. Given, the coefficient of linear expansion for steel is $\alpha = 1.1 \times 10^{-5} {}^{\circ} \text{C}^{-1}$ and Young's modulus of steel is $Y = 2.0 \times 10^{11} \text{ N/m}^2$. (in $\text{ N}$)

When a certain weight is suspended from a long uniform wire,its length increases by $1 \ cm$. If the same weight is suspended from another wire of the same material and length but having a diameter half of the first one,then the increase in length will be ........ $cm$.

$A$ metal string $A$ is suspended from a rigid support and its free end is attached to a block of mass $M$. $A$ second block having mass $2M$ is suspended at the bottom of the first block using a string $B$. The area of cross-sections of strings $A$ and $B$ are the same. The ratio of lengths of strings $A$ to $B$ is $2$ and the ratio of their Young's moduli $(Y_A/Y_B)$ is $0.5$. The ratio of elongations in $A$ to $B$ is . . . . . . .

Write the unit and dimensional formula of modulus of elasticity.

$A$ steel rod of diameter $1\,cm$ is clamped firmly at each end when its temperature is $25\,^{\circ}C$ so that it cannot contract on cooling. The tension in the rod at $0\,^{\circ}C$ is approximately ......... $N$ $(\alpha = 10^{-5}/\,^{\circ}C, Y = 2 \times 10^{11}\,N/m^2)$