Diameter of a steel ball is measured using a Vernier callipers which has divisions of $0.1\,cm$ on its main scale $(MS)$ and $10$ divisions of its vernier scale $(VS)$ match $9$ divisions on the main scale. Three such measurements for a ball are given as:

$S$.No.	$MS\;(cm)$	$VS$ divisions
$(1)$	$0.5$	$8$
$(2)$	$0.5$	$4$
$(3)$	$0.5$	$6$

If the zero error is $-0.03\,cm,$ then the mean corrected diameter is ........... $cm$.

$N$ divisions on the main scale of a vernier calliper coincide with $(N + 1)$ divisions of the vernier scale. If each division of the main scale is $a$ units,then the least count of the instrument is:

In an experiment with Vernier callipers of least count $0.1\,mm$,when two jaws are joined together,the zero of the Vernier scale lies to the right of the zero of the main scale and the $6^{th}$ division of the Vernier scale coincides with a main scale division. While measuring the diameter of a spherical bob,the zero of the Vernier scale lies between $3.2\,cm$ and $3.3\,cm$ marks,and the $4^{th}$ division of the Vernier scale coincides with a main scale division. The diameter of the bob is measured as $.......\,cm$.

The length of a cylinder measured by a Vernier caliper is given by the following observations: $3.29 \, cm, 3.28 \, cm, 3.29 \, cm, 3.31 \, cm, 3.28 \, cm, 3.27 \, cm, 3.29 \, cm, 3.30 \, cm$. The most accurate length of the cylinder is ........ $cm$.

The pitch of the screw gauge is $1\, mm$ and there are $100$ divisions on the circular scale. When nothing is put in between the jaws,the zero of the circular scale lies $8$ divisions below the reference line. When a wire is placed between the jaws,the first linear scale division is clearly visible while $72^{nd}$ division on the circular scale coincides with the reference line. The radius of the wire is.........$mm$

In a Vernier Calipers,$10$ divisions of the Vernier scale are equal to $9$ divisions of the main scale. When both jaws of the Vernier calipers touch each other,the zero of the Vernier scale is shifted to the left of the zero of the main scale,and the $4^{\text{th}}$ Vernier scale division exactly coincides with a main scale division. One main scale division is equal to $1\,mm$. While measuring the diameter of a spherical body,the body is held between the two jaws. It is observed that the zero of the Vernier scale lies between $30$ and $31$ divisions of the main scale,and the $6^{\text{th}}$ Vernier scale division exactly coincides with a main scale division. The diameter of the spherical body is $.......\,cm$.