Four identical discs each of mass M and diame | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) Let the radius of each disc be $R = \frac{a}{2}$.For the two discs lying on the axis $OO'$,the axis passes through their diameters. The moment of

Vedclass · Accepted Answer

$3$

Vedclass · Answer

(D) Let the radius of each disc be $R = \frac{a}{2}$.For the two discs lying on the axis $OO'$,the axis passes through their diameters. The moment of inertia of a disc about its diameter is $I_{diam} = \frac{1}{4} MR^2$.Thus,for the top and bottom discs,$I_1 = I_3 = \frac{1}{4} MR^2$.For the two discs on the sides,the axis $OO'$ is tangent to them. Using the parallel axis theorem,$I = I_{cm} + Md^2$,where $I_{cm} = \frac{1}{2} MR^2$ and $d = R$.So,$I_2 = I_4 = \frac{1}{2} MR^2 + MR^2 = \frac{3}{2} MR^2$.The total moment of inertia of the system is $I = I_1 + I_2 + I_3 + I_4 = 2 	imes (\frac{1}{4} MR^2) + 2 	imes (\frac{3}{2} MR^2) = \frac{1}{2} MR^2 + 3 MR^2 = \frac{7}{2} MR^2$.Substituting $R = \frac{a}{2}$,we get $I = \frac{7}{2} M(\frac{a}{2})^2 = \frac{7}{2} 	imes \frac{Ma^2}{4} = \frac{7}{8} Ma^2$.Wait,re-evaluating the geometry: The axis $OO'$ passes through the centers of the top and bottom discs (diameter) and is tangent to the side discs. The calculation $I = \frac{7}{2} MR^2$ is correct. With $R = a/2$,$I = \frac{7}{8} Ma^2 = \frac{3.5}{4} Ma^2$. Given the options and the standard form $\frac{x}{4}Ma^2$,if the side discs are at distance $R$ from the axis,$x=3.5$. Checking the provided solution logic: $I_2 = I_4 = \frac{1}{4}MR^2 + MR^2 = \frac{5}{4}MR^2$. This assumes the side discs rotate about an axis parallel to their diameter at distance $R$. Total $I = 2(\frac{1}{4}MR^2) + 2(\frac{5}{4}MR^2) = 3MR^2 = 3M(a/2)^2 = \frac{3}{4}Ma^2$. Thus $x=3$.

Four identical discs each of mass $M$ and diameter $a$ are arranged in a plane as shown in the figure. If the moment of inertia of the system about $OO'$ is $\frac{x}{4} Ma^2$,then the value of $x$ will be:

Similar Questions

$A$ thin wire of length $L$ and linear mass density $m$ is bent into a circular ring (in $x-y$ plane) with centre $C$ as shown in the figure. The moment of inertia of the ring about an axis $yy'$ will be:

What is the moment of inertia of a disc about one of its diameters?

If $I$ is the moment of inertia of a thin circular disc about an axis passing through the tangent of the disc and in the plane of the disc,what is the moment of inertia of the same circular disc about an axis perpendicular to the plane and passing through its centre?

The moment of inertia of a rod (length $l$,mass $m$) about an axis perpendicular to the length of the rod and passing through a point equidistant from its midpoint and one end is:

Moment of inertia of a disc of mass $M$ and radius $R$ about any of its diameter is $MR^2/4$. The moment of inertia of this disc about an axis normal to the disc and passing through a point on its edge will be $(x/2)MR^2$. The value of $x$ is

Vedclass Test Series

Exam Paper Generator

Online Exam Module