Four identical rods are stretched by the same force. The maximum extension is produced in:

$A$ uniformly tapering conical wire is made from a material of Young's modulus $Y$ and has a normal,unextended length $L$. The radii at the upper and lower ends of this conical wire have values $R$ and $3R$,respectively. The upper end of the wire is fixed to a rigid support and a mass $M$ is suspended from its lower end. The equilibrium extended length of this wire would be:

The dimensions of four wires of the same material are given below. The increase in length is maximum in the wire of

$A$ copper wire of length $4.0 \, m$ and area of cross-section $1.2 \, cm^2$ is stretched with a force of $4.8 \times 10^3 \, N$. If Young's modulus for copper is $1.2 \times 10^{11} \, N/m^2$,the increase in the length of the wire will be:

Two persons pull a wire towards themselves. Each person exerts a force of $200 \, N$ on the wire. Young's modulus of the material of the wire is $1 \times 10^{11} \, N \, m^{-2}$. The original length of the wire is $2 \, m$ and the area of cross-section is $2 \, cm^2$. The wire will extend in length by $...... \, \mu m$.

$A$ steel wire and a copper wire are joined end to end having equal cross-sections. The elongation of the two wires is found to be equal under tension. What is the ratio of the length of the steel wire to the length of the copper wire? (Young's modulus of steel $= 2.0 \times 10^{11} \ N \ m^{-2}$ and Young's modulus of copper $= 1.1 \times 10^{11} \ N \ m^{-2}$)