If two bulbs of wattage 25, W and 100, W resp | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Resistance of $25\, W$ bulb is $R_1 = \frac{V^2}{P_1} = \frac{220^2}{25} = 1936\,\Omega$. Its maximum safe current is $I_1 = \frac{P_1}{V} = \frac

Vedclass · Accepted Answer

$25\, W$ bulb

Vedclass · Answer

(B) Resistance of $25\, W$ bulb is $R_1 = \frac{V^2}{P_1} = \frac{220^2}{25} = 1936\,\Omega$. Its maximum safe current is $I_1 = \frac{P_1}{V} = \frac{25}{220} \approx 0.1136\, A$. Resistance of $100\, W$ bulb is $R_2 = \frac{V^2}{P_2} = \frac{220^2}{100} = 484\,\Omega$. Its maximum safe current is $I_2 = \frac{P_2}{V} = \frac{100}{220} \approx 0.4545\, A$. When connected in series to a $440\, V$ supply,the total resistance is $R_{eq} = R_1 + R_2 = 1936 + 484 = 2420\,\Omega$. The current flowing through the series circuit is $I = \frac{V_{total}}{R_{eq}} = \frac{440}{2420} = \frac{2}{11} \approx 0.1818\, A$. Since the current $I \approx 0.1818\, A$ is greater than the safe current $I_1 \approx 0.1136\, A$ of the $25\, W$ bulb,the $25\, W$ bulb will fuse.

If two bulbs of wattage $25\, W$ and $100\, W$ respectively,each rated at $220\, V$,are connected in series with a supply of $440\, V$,then which bulb will fuse?

Similar Questions

In the circuit shown, if the current through the resistor $R$ is $\frac{1}{5} \, A$, the value of $R$ is (in $\Omega$)

For ensuring the dissipation of the same energy in all three resistors $(R_1, R_2, R_3)$ connected as shown in the figure,their values must be related as:

$A$ $8 \Omega$ resistor is connected to a battery that has an internal resistance of $0.2 \Omega$. If the voltage across the battery (the terminal voltage) is $10 \ V$,then the emf of the battery is (in $V$)

Two wires of the same material having lengths and radii in the ratio of $3:4$ and $3:2$ respectively are connected in parallel with a potential source of $6 \ V$. The ratio of currents flowing through them $I_1:I_2$ is . . . . . . .

The reading in the ideal voltmeter $(V)$ shown in the given circuit diagram is: (in $ V$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module