In the following hexagons,made up of two different materials $P$ and $Q$,current enters and leaves from points $X$ and $Y$ respectively. In which case is the magnetic field at its centre not zero?

Mark the correct statement.

Two parallel long wires carry currents $i_1$ and $i_2$ with $i_1 > i_2$. When the currents are in the same direction,the magnetic field midway between the wires is $10 \, \mu T$. When the direction of $i_2$ is reversed,it becomes $40 \, \mu T$. The ratio $i_1/i_2$ is

$A$ beam of electrons and protons move parallel to each other in the same direction. Then they:

If the temperature of the cold junction of a thermocouple is lowered,then the neutral temperature

In a thin rectangular metallic strip, a constant current $I$ flows along the positive $x$-direction, as shown in the figure. The length, width, and thickness of the strip are $\ell$, $w$, and $d$, respectively. A uniform magnetic field $\vec{B}$ is applied on the strip along the positive $y$-direction. Due to this, the charge carriers experience a net deflection along the $z$-direction. This results in the accumulation of charge carriers on the surface $PQRS$ and the appearance of equal and opposite charges on the face opposite to $PQRS$. A potential difference along the $z$-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross-section of the strip and carried by electrons.
$1.$ Consider two different metallic strips ($1$ and $2$) of the same material. Their lengths are the same, widths are $w_1$ and $w_2$, and thicknesses are $d_1$ and $d_2$, respectively. Two points $K$ and $M$ are symmetrically located on the opposite faces parallel to the $x$-$y$ plane (see figure). $V_1$ and $V_2$ are the potential differences between $K$ and $M$ in strips $1$ and $2$, respectively. Then, for a given current $I$ flowing through them in a given magnetic field strength $B$, the correct statement$(s)$ is(are):
$(A)$ If $w_1=w_2$ and $d_1=2d_2$, then $V_2=2V_1$
$(B)$ If $w_1=w_2$ and $d_1=2d_2$, then $V_2=V_1$
$(C)$ If $w_1=2w_2$ and $d_1=d_2$, then $V_2=2V_1$
$(D)$ If $w_1=2w_2$ and $d_1=d_2$, then $V_2=V_1$
$2.$ Consider two different metallic strips ($1$ and $2$) of same dimensions (lengths $\ell$, width $w$, and thickness $d$) with carrier densities $n_1$ and $n_2$, respectively. Strip $1$ is placed in magnetic field $B_1$ and strip $2$ is placed in magnetic field $B_2$, both along positive $y$-directions. Then $V_1$ and $V_2$ are the potential differences developed between $K$ and $M$ in strips $1$ and $2$, respectively. Assuming that the current $I$ is the same for both the strips, the correct option$(s)$ is(are):
$(A)$ If $B_1=B_2$ and $n_1=2n_2$, then $V_2=2V_1$
$(B)$ If $B_1=B_2$ and $n_1=2n_2$, then $V_2=V_1$
$(C)$ If $B_1=2B_2$ and $n_1=n_2$, then $V_2=0.5V_1$
$(D)$ If $B_1=2B_2$ and $n_1=n_2$, then $V_2=V_1$
Give the answer for question $1$ and $2$.