In the given figure,two elastic rods A and B | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The motion of the mass $m$ consists of two parts: free motion between the rods and the time spent during collisions with the rods.$1$. Time taken

Vedclass · Accepted Answer

$\frac{2L}{v} + 2\pi \sqrt{\frac{mL}{AY}}$

Vedclass · Answer

(A) The motion of the mass $m$ consists of two parts: free motion between the rods and the time spent during collisions with the rods.$1$. Time taken to travel the distance $L$ between the rods: The mass travels distance $L$ twice in one cycle (once to the right and once to the left). Thus,$t_{free} = \frac{2L}{v}$.$2$. Time spent in collisions: The rods act as springs. For rod $B$ (area $A$,modulus $Y$,length $L$),the spring constant is $k_B = \frac{YA}{L}$. The time spent in contact with rod $B$ is half the time period of a spring-mass system: $t_B = \frac{1}{2} 	imes 2\pi \sqrt{\frac{m}{k_B}} = \pi \sqrt{\frac{mL}{AY}}$.$3$. For rod $A$ (area $A/2$,modulus $2Y$,length $L$),the spring constant is $k_A = \frac{(2Y)(A/2)}{L} = \frac{YA}{L}$. The time spent in contact with rod $A$ is $t_A = \frac{1}{2} 	imes 2\pi \sqrt{\frac{m}{k_A}} = \pi \sqrt{\frac{mL}{AY}}$.$4$. Total time period $T = t_{free} + t_A + t_B = \frac{2L}{v} + \pi \sqrt{\frac{mL}{AY}} + \pi \sqrt{\frac{mL}{AY}} = \frac{2L}{v} + 2\pi \sqrt{\frac{mL}{AY}}$.

List-$I$	List-$II$
$A$. Young's Modulus	$I$. $\frac{Ad}{\Delta L}$
$B$. Compressibility	$II$. $\frac{FL}{A\Delta L}$
$C$. Bulk Modulus	$III$. $-\frac{1}{\Delta P}(\frac{\Delta V}{V})$
$D$. Poisson's Ratio	$IV$. $-\frac{\Delta D/D}{\Delta L/L}$

Similar Questions

Match List-$I$ with List-$II$:

List-$I$ List-$II$

$A$. Young's Modulus $I$. $\frac{Ad}{\Delta L}$

$B$. Compressibility $II$. $\frac{FL}{A\Delta L}$

$C$. Bulk Modulus $III$. $-\frac{1}{\Delta P}(\frac{\Delta V}{V})$

$D$. Poisson's Ratio $IV$. $-\frac{\Delta D/D}{\Delta L/L}$

$A$ spring is stretched by applying a load to its free end. The strain produced in the spring is

$A$ uniform wire (Young's modulus $2 \times 10^{11} \, Nm^{-2}$) is subjected to a longitudinal tensile stress of $5 \times 10^7 \, Nm^{-2}$. If the overall volume change in the wire is $0.02\%$,the fractional decrease in the radius of the wire is close to:

If the breaking stress of a wire is $3.18 \times 10^{10} \, N/m^2$,what should be its minimum radius so that the wire does not break? (Refer to the figure for the masses attached to the pulley system,assume $g = 10 \, m/s^2$)

For the tensile stress on the cross-section $PQRS$ to be maximum,$\theta =$ ......... $^o$

Vedclass Test Series

Exam Paper Generator

Online Exam Module