Let L be the length and d be the diameter of | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The extension $\Delta L$ of a wire is given by the formula $\Delta L = \frac{F \cdot L}{A \cdot Y}$, where $F$ is the tension, $L$ is the length,

Vedclass · Accepted Answer

$L = 50 \ cm, d = 0.05 \ mm$

Vedclass · Answer

(C) The extension $\Delta L$ of a wire is given by the formula $\Delta L = \frac{F \cdot L}{A \cdot Y}$, where $F$ is the tension, $L$ is the length, $A$ is the cross-sectional area, and $Y$ is Young's modulus.Since $A = \pi \cdot (d/2)^2 = \frac{\pi d^2}{4}$, we can write $\Delta L = \frac{4 F L}{\pi d^2 Y}$.Given that $F$ and $Y$ are constant for the same material and same tension, we have $\Delta L \propto \frac{L}{d^2}$.Calculating the ratio $\frac{L}{d^2}$ for each case:$A: \frac{200}{(0.5)^2} = \frac{200}{0.25} = 800$$B: \frac{300}{(1.0)^2} = \frac{300}{1} = 300$$C: \frac{50}{(0.05)^2} = \frac{50}{0.0025} = 20000$$D: \frac{100}{(0.2)^2} = \frac{100}{0.04} = 2500$Comparing these values, the ratio is maximum for option $C$.

Let $L$ be the length and $d$ be the diameter of the cross-section of a wire. Wires of the same material with different $L$ and $d$ are subjected to the same tension along the length of the wire. In which of the following cases will the extension of the wire be the maximum?

Similar Questions

$A$ fixed volume of iron is drawn into a wire of length $l$. The extension produced in this wire by a constant force $F$ is proportional to

Two wires $A$ and $B$ of same length, same radius and same Young's modulus are heated to the same range of temperatures. If the coefficient of linear expansion of $A$ is $\frac{3}{2}$ times that of $B$, then the ratio of the thermal stresses produced in the two wires $A$ and $B$ is

$A$ wire of length $L$ and radius $r$ is rigidly fixed at one end. On stretching the other end of the wire with a force $F$,the increase in its length is $l$. If another wire of same material but of length $2L$ and radius $2r$ is stretched with a force of $2F$,the increase in its length will be

The unit of Young's modulus is

Vedclass Test Series

Exam Paper Generator

Online Exam Module