What is the modulus of rigidity of a liquid?

The units of modulus of rigidity are

As shown in the figure,forces of $10^5\,N$ each are applied in opposite directions on the upper and lower faces of a cube of side $10\,cm$,shifting the upper face parallel to itself by $0.5\,cm$. If the side of another cube of the same material is $20\,cm$,then under similar conditions as above,the displacement will be ......... $cm$.

$A$ rectangular metallic block of dimensions $40 \text{ mm} \times 20 \text{ mm}$ when pulled with a tension of $50 \text{ kN}$ undergoes only elastic deformation. The strain in the block is (The shear modulus of the material of the block is $40 \times 10^9 \text{ Nm}^{-2}$)

$A$ steel rod is projecting out of a rigid wall. The shearing strength of steel is $345 \, MN/m^2$. The dimensions are $AB = 5 \, cm$ and $BC = BE = 2 \, cm$. The maximum load that can be put on the face $ABCD$ is .......... $kg$ (neglect bending of the rod). Take $g = 10 \, m/s^2$.

$A$ rubber cube of side $5 \ cm$ has one face fixed while a tangential force $1800 \ N$ is applied on its opposite face. If the modulus of rigidity of rubber is $2.4 \times 10^6 \ N \ m^{-2}$,then the lateral displacement of the strained face is $......$ . (in $mm$)