On applying a potential of -1 V at the grid | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) Given,for $V_g = -1 \ V$,the relation is $I_p = 0.125 V_p - 7.5$.For $V_g = -3 \ V$ and $V_p = 300 \ V$,the plate current $I_p = 5 \ mA$.To find t

Vedclass · Accepted Answer

$100$

Vedclass · Answer

(A) Given,for $V_g = -1 \ V$,the relation is $I_p = 0.125 V_p - 7.5$.For $V_g = -3 \ V$ and $V_p = 300 \ V$,the plate current $I_p = 5 \ mA$.To find the amplification factor $\mu = \left( \frac{\Delta V_p}{\Delta V_g} ight)_{I_p = 	ext{const}}$,we first find the plate voltage $V_p'$ required to maintain $I_p = 5 \ mA$ at $V_g = -1 \ V$.Substituting $I_p = 5 \ mA$ in the given equation:$5 = 0.125 V_p' - 7.5$$12.5 = 0.125 V_p'$$V_p' = \frac{12.5}{0.125} = 100 \ V$.Now,the change in plate voltage $\Delta V_p = 300 \ V - 100 \ V = 200 \ V$.The change in grid voltage $\Delta V_g = -1 \ V - (-3 \ V) = 2 \ V$.Therefore,the amplification factor $\mu = \frac{\Delta V_p}{\Delta V_g} = \frac{200 \ V}{2 \ V} = 100$.

Similar Questions

The slope of the plate characteristic of a vacuum tube diode for a certain operating point on the curve is $10^{-3} \text{ mA/V}$. The plate resistance of the diode and its nature are respectively:

In the grid circuit of a triode,a signal $E = 2\sqrt{2} \cos(\omega t)$ is applied. If the amplification factor $\mu = 14$ and the plate resistance $r_p = 10\,k\Omega$,then the root mean square $(RMS)$ current flowing through the load resistance $R_L = 12\,k\Omega$ will be.......$mA$.

The transconductance of a triode amplifier is $2.5 \, \text{mS}$ (milli-mho) and its plate resistance is $20 \, \text{k}\Omega$. If the voltage amplification is $10$, find the load resistance in $\text{k}\Omega$.

In a triode,the cathode,grid,and plate are at potentials of $0 \, V$,$-2 \, V$,and $80 \, V$ respectively. Electrons are emitted from the cathode with an initial kinetic energy of $3 \, eV$. What is the energy of the electron when it reaches the plate in $eV$?

In a diode valve,the state of saturation can be obtained easily by

Vedclass Test Series

Exam Paper Generator

Online Exam Module