The coefficients of thermal conductivity of copper,mercury,and glass are respectively $K_c, K_m$,and $K_g$ such that $K_c > K_m > K_g$. If the same quantity of heat is to flow per second per unit area of each and corresponding temperature gradients are $X_c, X_m$,and $X_g$,then:

Two rods are connected as shown. The rods are of the same length and same cross-sectional area. In the steady state,the temperature $(\theta)$ of the interface will be........ $^oC$

Two rods $A$ and $B$ of the same cross-sectional area $A$ and length $l$ are connected in series between a source $(T_1 = 100^{\circ}C)$ and a sink $(T_2 = 0^{\circ}C)$ as shown in the figure. The rods are laterally insulated. If $G_A$ and $G_B$ are the temperature gradients across rod $A$ (thermal conductivity $3K$) and rod $B$ (thermal conductivity $K$),then:

Copper and iron rods of identical dimensions are coated with wax. The ratio of thermal conductivity of copper to iron is $10:9$. If one end of each rod is placed in hot water,the wax melts. Find the ratio of the lengths of the rods for which the wax melts at the same rate.

$A$ rod of length $10 \, cm$ has a cross-sectional area of $100 \, cm^2$ and a thermal conductivity of $400 \, W/m^\circ C$. If the heat flow through the rod is $4000 \, J/s$,find the temperature difference between the two ends in $^\circ C$.

Two metal rods $1$ and $2$ have the same length and the same temperature difference at their ends. Their thermal conductivities are $K_1$ and $K_2$ and their cross-sectional areas are $A_1$ and $A_2$ respectively. The condition for the same rate of heat flow in them is ........