The elastic limit of brass is 379,MPa. What s | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The stress $\sigma$ is defined as the force $F$ divided by the cross-sectional area $A$. To remain within the elastic limit,the stress must not ex

Vedclass · Accepted Answer

$1.16$

Vedclass · Answer

(B) The stress $\sigma$ is defined as the force $F$ divided by the cross-sectional area $A$. To remain within the elastic limit,the stress must not exceed the elastic limit $\sigma_{max} = 379\,MPa = 379 	imes 10^6\,Pa$.The formula for stress is $\sigma = \frac{F}{A} = \frac{F}{\frac{\pi}{4}d^2}$.Given $F = 400\,N$ and $\sigma = 379 	imes 10^6\,Pa$,we have:$379 	imes 10^6 = \frac{400}{\frac{\pi}{4}d^2}$.Rearranging for $d^2$:$d^2 = \frac{4 	imes 400}{\pi 	imes 379 	imes 10^6} = \frac{1600}{1190.7 	imes 10^6} \approx 1.3437 	imes 10^{-6}\,m^2$.Taking the square root:$d = \sqrt{1.3437} 	imes 10^{-3}\,m \approx 1.159 	imes 10^{-3}\,m$.Converting to $mm$:$d \approx 1.16\,mm$.

The elastic limit of brass is $379\,MPa$. What should be the minimum diameter (in $mm$) of a brass rod if it is to support a $400\,N$ load without exceeding its elastic limit?

Similar Questions

The load versus elongation graph for four wires of the same material is shown in the figure. The thickest wire is represented by the line

$A$ force $F$ is needed to break a copper wire having radius $R$. The force needed to break a copper wire of radius $2R$ will be

$A$ tangential force of $100 \,N$ is applied on the top face of a cubic block of side $0.1 \,m$. If the top face is displaced by $0.02 \,cm$ relative to the bottom face,what is the tangential strain?

$A$ wire of diameter $1\, mm$ breaks under a tension of $1000\, N.$ Another wire,of the same material as that of the first one,but of diameter $2\, mm$ breaks under a tension of ...... $N$.

$A$ wire is hanged from the ceiling without any weight below it. Would there be any stress in the wire?

Vedclass Test Series

Exam Paper Generator

Online Exam Module