The flux associated with a closed loop is $\phi = 3t^2 + 2t + 5 \text{ Wb}$. If the resistance of the loop is $14 \ \Omega$,then the current induced in this coil at $t = 2 \text{ s}$ is . . . . . . . (in $\text{ A}$)

In a circuit with a coil of resistance $2\, \Omega$,the magnetic flux changes from $2.0\, Wb$ to $10.0\, Wb$ in $0.2\, s$. The charge that flows in the coil during this time is..........$C$.

$A$ circular loop made of thin copper wire of mass $m$ is placed in a uniform magnetic field such that the plane of the loop is perpendicular to the magnetic field. If $d$ and $\rho$ are the density and resistivity of copper respectively and the magnetic field varies at a constant rate of $\frac{dB}{dt}$,then the induced current in the loop is . . . . . .

The magnetic flux linked with a circuit of resistance $100\, \Omega$ increases from $10\, \text{Wb}$ to $60\, \text{Wb}$. The amount of induced charge that flows in the circuit is (in coulomb):

Consider a magnet surrounded by a wire loop with an on/off switch $S$ as shown in the figure. If the switch is thrown from the off position (open circuit) to the on position (closed circuit), will a current flow in the circuit? Explain.

$A$ magnetic field of $2 \times 10^{-2} \,T$ acts at right angles to a coil of area $100 \,cm^2$ with $50$ turns. The average e.m.f. induced in the coil is $0.1 \,V$, when it is removed from the field in time $t$. The value of $t$ is (in seconds): (in $s$)