The least count of a screw gauge is $0.01 \ mm$. If the pitch is increased by $75\%$ and the number of divisions on the circular scale is reduced by $50\%$,the new least count will be . . . . . . $\times 10^{-3} \ mm$.

$A$ travelling microscope has $20$ divisions per $cm$ on the main scale while its Vernier scale has total $50$ divisions and $25$ Vernier scale divisions are equal to $24$ main scale divisions. What is the least count of the travelling microscope in $cm$?

In a screw gauge, the zero of the circular scale lies $3$ divisions above the horizontal pitch line when their metallic studs are brought in contact. Using this instrument, the thickness of a sheet is measured. If the pitch scale reading is $1 \ mm$ and the circular scale reading is $51$, then the correct thickness of the sheet is . . . . . . $mm$. [Assume least count is $0.01 \ mm$]

In a vernier calliper,when both jaws touch each other,the zero of the vernier scale shifts towards the left and its $4^{\text{th}}$ division coincides exactly with a certain division on the main scale. If $50$ vernier scale divisions $(VSD)$ are equal to $49$ main scale divisions $(MSD)$ and the zero error in the instrument is $0.04 \text{ mm}$,then how many main scale divisions are there in $1 \text{ cm}$?

For the determination of the refractive index of a glass slab,a travelling microscope is used whose main scale contains $300$ equal divisions equal to $15 \ cm$. The vernier scale attached to the microscope has $25$ divisions equal to $24$ divisions of the main scale. The least count $(LC)$ of the travelling microscope is (in $cm$):

While measuring the diameter of a wire using a screw gauge, the following readings were noted. The main scale reading is $1 \,mm$ and the circular scale reading is equal to $42$ divisions. The pitch of the screw gauge is $1 \,mm$ and it has $100$ divisions on the circular scale. The diameter of the wire is $\frac{x}{50} \,mm$. The value of $x$ is: