The mean and rms value of an alternating volt | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) For the given square wave,the voltage $V(t)$ is $V_0$ for $0 < t < T/2$ and $-V_0$ for $T/2 < t < T$.$1$. Mean value for a half cycle ($0$ to $T/2

Vedclass · Accepted Answer

$V_0, V_0$

Vedclass · Answer

(A) For the given square wave,the voltage $V(t)$ is $V_0$ for $0 $1$. Mean value for a half cycle ($0$ to $T/2$):$V_{mean} = \frac{1}{T/2} \int_0^{T/2} V_0 dt = \frac{2}{T} [V_0 t]_0^{T/2} = \frac{2}{T} \cdot V_0 \cdot \frac{T}{2} = V_0$.$2$. $rms$ value for a full cycle (or half cycle):$V_{rms} = \sqrt{\frac{1}{T} \int_0^T V^2 dt} = \sqrt{\frac{1}{T} [\int_0^{T/2} V_0^2 dt + \int_{T/2}^T (-V_0)^2 dt]} = \sqrt{\frac{1}{T} [V_0^2 \cdot \frac{T}{2} + V_0^2 \cdot \frac{T}{2}]} = \sqrt{\frac{1}{T} \cdot V_0^2 \cdot T} = V_0$.Thus,the mean and $rms$ values are $V_0$ and $V_0$ respectively.

The mean and $rms$ value of an alternating voltage for a half cycle,as shown in the figure,are respectively:

Similar Questions

$A$ current in a circuit is given by $i = 3 + 4 \sin \omega t$. Then the effective value ($RMS$ value) of the current is:

Find the $RMS$ value for the saw-tooth voltage of peak value $V_0$ from $t = 0$ to $t = 2T$ as shown in the figure.

The frequency of an alternating voltage is $50 \ Hz$. The time taken for the instantaneous voltage to increase from zero to half of its peak voltage is:

The voltage of an $AC$ source varies with time according to the equation,$V = 100 \sin(100 \pi t) \cos(100 \pi t)$. Where $t$ is in seconds and $V$ is in volts. Then:

Define the root mean square (rms) value of an alternating current and provide its formula. Also,show the relationship between the rms current and the peak current on a graph of current versus $\omega t$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module