Two different wires made with the same material have their radii in the ratio $1:2$. Their lengths are also in the ratio $1:2$. If the extensions produced are equal when subjected to different loads,find the ratio of the loads applied.

Two wires of the same material have lengths in the ratio $1:2$ and diameters in the ratio $2:1$. If they are stretched by forces $F_A$ and $F_B$ respectively to produce the same extension,then the ratio $\frac{F_A}{F_B}$ is:

$A$ copper wire and a steel wire of the same diameter and length are connected end to end and a force is applied,which stretches their combined length by $1 \ cm$. The two wires will have

In an experiment,brass and steel wires of length $1\,m$ each with areas of cross-section $1\,mm^2$ are used. The wires are connected in series and one end of the combined wire is connected to a rigid support,while the other end is subjected to an elongation. The stress required to produce a total elongation of $0.2\,mm$ is: [Given: Young's Modulus for steel and brass are $120 \times 10^9\,N/m^2$ and $60 \times 10^9\,N/m^2$ respectively]

Young's modulus of a material has the same units as

$A$ load of $2 \,kg$ produces an extension of $1 \,mm$ in a wire of $3 \,m$ in length and $1 \,mm$ in diameter. The Young's modulus of the wire will be .......... $Nm^{-2}$.