Two strings of the same material having lengths $L$ and $2L$,and radii $2r$ and $r$ respectively,are vibrating in the fundamental mode. The tension applied to both strings is the same. The ratio of their respective fundamental frequencies is:

The length of the wire shown in the figure between the pulleys is $1.5 \, m$ and its mass is $12.0 \, g$. The frequency of vibration with which the wire vibrates in three loops,forming an antinode at the midpoint of the wire,is: (Given $g = 9.8 \, m/s^2$)

When tension $T$ is applied to a sonometer wire of length $l$, it vibrates with the fundamental frequency $n$. Keeping the setup same, when the tension is increased by $8 \,N$, the fundamental frequency becomes three times the earlier. The initial tension applied to the wire was: (in $\,N$)

$A$ metallic wire with tension $T$ and at temperature $30^{\circ} C$ vibrates with its fundamental frequency of $1 \ kHz$. The same wire with the same tension but at $10^{\circ} C$ temperature vibrates with a fundamental frequency of $1.001 \ kHz$. The coefficient of linear expansion of the wire is

One insulated conductor from a household extension cord has a mass per unit length of $\mu$. $A$ section of this conductor is held under tension between two clamps. $A$ subsection is located in a magnetic field of magnitude $B$ directed perpendicular to the length of the cord. When the cord carries an $AC$ current of $i$ at a frequency of $f$,it vibrates in resonance in its simplest standing-wave vibration state. Determine the relationship that must be satisfied between the separation $d$ of the clamps and the tension $T$ in the cord.

$A$ string is under tension of $180 \ N$ and mass per unit length $2 \times 10^{-3} \ kg/m$. It produces two consecutive resonant frequencies with a tuning fork,which are $375 \ Hz$ and $450 \ Hz$. The mass of the string is: (in $g$)